PMT18-04377 City of Menifee Permit No.: PMT18-04377
29714 HAUN RD. Type: Residential Mechanical
MENIFEE,CA 92586
MENIFEE MENIFEE Date Issued: 09/0512018
PERMIT
Site Address: 28901 CROSBY DR, MENIFEE, CA 92586 Parcel Number: 337-383-004
Construction Cost: $7,000.00
Existing Use: Proposed Use:
Description of INSTALL 2 NEW MINI SPLIT HVAC SYSTEMS
Work: 9.8 AFUE/15.5 SEER
10.5 AFUE/2M SEER
Owner Contractor
VAIL REAL ESTATE. JOEL'S AIR CONDITIONING
29610 PAINTED DESERT DRIVE 4641 KENNY WAY
MENIFEE,CA 92584 HEMET, CA 92544
Applicant Phone:9512017226
JOEL'S AIR CONDITIONING License Number. 920888
4641 KENNY WAY
HEMET,CA 92544
Phone:9512017226
Fee Description Qtv Amount l5l
Forced-Air or Gravity-Type Furnace or Burner 1 149.00
Air Handling/Condensing Units SFR 1 133.00
Building Permit Issuance 1 27.00
GREEN FEE 1 1.00
General Plan Maintenance Fee-Mechanical 1 14.10
$324.10
The issuance of this permit shall not prevent the building official from thereafter requiring the correction of errors in the plans and
specifications or from preventing builiding operations being carried on thereunder when in violation of the Building Code or of any other
ordinance of City of Menifee.Except as otherwise stated,a permit for construction under which no work is commenced within six
months after issuance,or where the work commenced is suspended or abandoned for six months,shall expire,and fees paid shall be
forfeited.
AA Bldg_Permit_Template.rpt Page 1 of 1
CITY OF MENIFEE
LICENSED DECLARATION property who builds or improves thereon,and who contracts for the projects
I hereby affirm under penalty of perjury that I am under provisions of with a licensed contractor(s)pursuant to the Contractors State License Law).
Chapter9(commencing with section 7000)of Division 3 of the Business and ❑I am exempt from licensure under the Contractors State License Law for
Professions Cade and my license is in full force and effect. the fallowing reason:
License Class Z U Lice ns No. cZ r9 90"rs
By my signature below I acknowledge that,except for my personal residence
Expires $-3)-28'ZV Signature r in which I must have resided for at least one year priarto completion of
improvements covered by this permit.I cannot legally sell a structure that I
WORKER'S COMPENSATION DECLARA ION have built as an owner-builder if it has not been constructed in its entirety by
❑I hereby affirm under penalty of perjury one of the following declarations:I licensed contractors.I understand that a copy of the applicable law,Section
have and will maintain a certificate of consent of self-insure for worker's 7044 of the Business and Professions Code,is available upon request when
compensation,issued by the Director of Industrial Relations as provided for this application is submitted or at the following website:
by Section 3700 of the Labor Code,for the performance of work for which
this permit is issued.
www.leginfo.ca.gov/calaw.html.
Policy# Date
°I have and will maintain workers compensation OWNER OR AUTHORIZED AGENTn insurance,as required by sp
section 3700 of the Labor Code,for the performance of the work for which ❑By my signature below I certify to ea p-ree following:I am the property
this permit is issued.My worker's compensation insurance carrier and policy owner or authorized to act on th er's behalf.I have read this
number are: application and the informatj'��'@@Q@@Q((((((������I0 v c i orrect.l agree to comply
Carrier
with all appli inanceste laws relating to
lPilr ���vrrrrrr����__
building construction.I autho repres.0iv s of this cit r county to
Policy# Expires enterthe above identified propertry in ection purp
(This section need not to be completed is the permit is for one-hundred 73V 6,
dollars($100)or less ,4
PROPERTY OWNER OR AUTHORIZED AGENY�_
1 certify that in the performance of the work for which this permit is issued,
shall not emolov any persons in any manner so as to become subject to the CITY BUSINESS LICENSE# �1fA
worker's compensation laws of California,and agree that If I should become HAZARDOUS MATERIAL DECLARATION
subject to the worker's compensation provisions of Section 3700 of the Labor
Code,I shall forthwith comply with those provisions. Will the applicant or future building occupant handle hazardous material or a
�rJr.I, 1'�O�n/j.lil�A-� Date -1 r� mixture containing a hazardous material equal to or greater that the
Applicant 9-)
amounts specified on the Hazardous Materials Information Guide?
WARNING:FAILURE TO SECURE WORKER'S COMPENSATION COVERAGE IS oYes )u No
UNLAWFUL,AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES Will the intended use of the building by the applicant or future building
AND CIVIL FINES UP TOONE HUNDRED THOUSAND DOLLARS($100,000),IN occupant require a permit for the construction or modification from South
ADDITION TO THE COST OF COMPENSATION,DAMAGES AS PROVIDED FOR Coast Air Quality Management District(SCcton or See permitting checklist
IN SECTION 3706 OFTHE LABOR CODE,INTEREST,AND ATTORNEYS FEES fo Coast
Airlines
Qua
CONSTRUCTION LENDING AGENCY ❑Yes 9:No
I hereby affirm that under the penalty of perjury there is a construction Will the proposed building or modified facility be within 1000 feet of the
lending agency for the performance of the work which this permit is issued outer boundary of a school?
(Section 3097 Civil Code) ❑Yes �wNo
OWNER BUILDER DECLARATIONS I have read the Hazardous Material Information Guide and the SCAQMD
I hereby affirm under penalty of perjury that I am exempt from the permitting checklist.I understand my requirements under the State of
California Health&Safety Code,Section 25505 and 25534 concerning
Contractor's License.Law.for the reason(s)indicated below by{the hazardous material reporting.
-'- checkmark(s)I have placed next to the applicable item(s)_(Segtftin7031.5 -
Yes - oNo a _
Business and Professions Code).Any city or county that requires a permit to n ,N „m ,I6S, Date ra-
construct,alter,improve,demolish or repair any structure,priorto its PROPERTY OWNER OR AUTHORIZED AGENT
issuance,also requires the applicant for the permit to file a signed statement
that hear she is licensed pursuant to the provisions of the Contractor's State EPA RENOVATION,REPAIR AND PAINTING(RRPI
License Law(Chapter 9(commencing with Section 7000)of Division 3 of the The EPA Renovation,Repair and Painting(RRP)Rule requires contractors
Business and Professions Code)or that he or she is exempt from licensure receiving compensation for most work that disturbs paint in a pre-1978
and the basis for the alleged exemption.Any violation of Section 7031.5 by residence or childcare facility to be RRP-certified firms and comply with
an Applicant for a permit subjects the applicant to a civil penalty of not more required practices.This includes rental property owners and property
than($S00). managers who do the paint-disturbing work themselves or through their
❑1,as owner of the property,or my employee with wages as their sole employees.For more information about EPA's Renovation Program visit:
compensation,will do( )all of or( )portion of the work,and the structure is www.eoa.gov/lead or contact the National Lead Information Center at
not intended or offered for sale.(Section 7044,Business and Professions 1-800-424-LEAD(5323).
Code;The Contractor's State License Law does not apply to an owner of a
property who,through employees'or personal effort,builds or improves the °An EPA Lead-Safe Certified Renovator will be responsible for this project
Property provided that the Improvements are not intended or offered for Certified Firm Name:
sale.If,however,the building or improvement is sold within one year of Firm Certification No.:
completion,the Owner-Builder will have the burden of proving that it was
not built or improved for the purpose of sale. D No EPA Lead-Safe Certified Firm is required forthis project because:
❑I,as owner of the property am exclusively contracting with licensed
contractors to construct the project(Section 7044,Business and Professions
Code:The Contractor's State License Law does not apply to an owner of a If your project does not comply with EPA RRP rule please fill outthe RRP
Acknowledgement.
MENIFEE
DATE: PERMIT/PLAN CHECK NUMBER U
GRADING/PLANNING CASE NUMBER/OTHER RELATED CASES
TYPE: O COMMERCIAL '®RESIDENTIAL O MULTI-FAMILY O MOBILE HOME O POOL/SPA 0 SIGN
SUBTYPE: OADDITION O ALTERATION O DEMOLITION ()ELECTRICAL O' MECHANICAL
ONEW OPLUM13ING ORE-ROOF NUMBER OF SQUARES
-
Install a mini-split sys ems.
DESCRIPTION OF WORK
OCCUPANCYGROUP CONSTRUCTION TYPE SPRINKLERS YES ONO
PROTECT ADDRESS ZIP
28901 Crosby Dr, Sun City, CA 92586 L--
ASSESSOR'S PARCEL NUMBER 337383004-9 LOT 352 TRAOT2364 City of Menifee
OWNER NAME Vail Real Estate, Inc (Clifford E. Vail)
ADDRESS 29610 Painted Desert Dr, Men'Ifee, CA 92584
PHONE '35I 0103-13t10 EMAIL Received
APPLICANT NAME 14)^
ADDRESS pp
PHONE "IS1 SDI 7 b2L EMAIL SUE �� CO'�PiT.1/ni .If Anna . ec.�
CONTRACTOR'S NAME Joel E Chamberlain, Jr OWNER BUILDER? OYES(j)NO
BUSINESS NAME Joel's Air Conditioning
ADDRESS 4641 Kenny Way, Hemet, CA 92544
PHONE (951)201-7226 EMAIL joelsairconditioning@hotmail.com
CONTRACTOR'S STATE LIC NUMBER 920885 LICENSE CLASSIFICATION C-20
VALUATION$ to QFT 1191 LSoFT 6534
APPLICANT'S SIGNATURE
DEPARTMENT DISTRIBUTION ACCEPTED BY: CFFY OF MENIFEE BUSINESS LICENSE NUMBER
BUILDING PLANNING ENGINEERING FIRE
INVOICE TOTAL I GREEN SMIP
OWNER BUILDER VERIFIED O YES C' NO DRIVERS LICENSE# NOTARIZED LETTER O YES O NO
City of Menifee Building &Safety Department 129714 Haun Rd.,Menifee,CA 92586(951)672-6777 _--
�fYC�
www.cityofinenifee.usIL _
A061
PIMN-1PNIN
w
STATE OF CALIFORNIA
ALTERATIONS - HVAC
CEC-CFIR-ALT44E(Revised 03l1 CALIFORNIA ENERGY COMMISSION
CERTIFICATE OF COMPLIANCE CF1R-ALT-04-E
Alterations-HVAC CZ 2,and 8-15(formerly CF-IR-ALT-HVAC) (Page 1 of 1)
Site Address: Enforcement Agency: Date Prepared: Permit#:
Equipment Type Equipment Efficiency New Ducting,Plenums,Lfneset: Conditioned Thermostat
Required R-value Floor Area(sq ft)
0 Packaged ❑Evaporator Coil Qr�1FUE COP 13 R-6 (CZ 2,&13)Ducting Served by system Setback
System ❑Condensing Unit OR-8' (CZ 11,14,15)Ducting sgft (If not already
❑Split System ❑Compressor ZZ r GSEEFt HSPF present must
jd Mini Split ❑Uneset 0 R-5(all 7.5) Plenums he installed)
EER ❑R-5 or R7.5)Uneset
❑Furnace ❑TXV -
HERS VERIFICATION SUMMARY Installer determines work to be completed and matches to one of the options below. At permit application this
form is allowed to be filled out by hand. Forfinal inspection all forms are to be registered no hand filled forms allowed)and a copy left on site.
01.HVAC Changeout/Repair Required Compliance Documents to be left on site for Final:
All Equipment, CFSR-ALT-02-E
Condenser Unit,Evaporator Coil, CF2R: MECH-01,MECH-20-HERS,MECH-(23 or 24)'-HERS,MECH-25-HERS'
Compressor,TXV,Lineset, CF3R: MECH-20-HERS,MECH-(23 or 24)-HERS',MECH-25-HERS'
Air Handler/Fumace'(Can include new ducting)
Installer Requirement:Duct leakage(<15%,or<10%to outside,or seal all accessible leaks),Air Flow i 300 CFM/ton,Refrigerant Charge.
Exempted from duct leakage testing IF:
0 1.Duct system registered with HERS provider as previously sealed,or 0 2.There is less than 40 linearfeet of duct in unconditioned space,or
0 3.Existing duct systems are constructed,insulated or sealed with asbestos(list manufacture date of buiidin
❑2.New HVAC System I Required Compliance Documents to be left on site for Final:
All new equipment and All New Ducts' CFIR-ALT-02-E
Including Mini Split CF2R: MECH-01,MECH-20-HERS,MECH-22-HERS,MECH-(23 or 24)-HERS',MECH-25-HERS'
CF3R: MECH-20-HERS,MECH-22-HERS,MECH{23 or 24}HERS',MECH-25-HERS' O
Mini Splits require CF1R-ALT-02-E,CF2R-MECH-01,and (CF2R-CF3R)MECH-25-HERS
Installer Requirement:Duct leakage<6%,Fan Efficacy(.58W/CFM),Air Flow>_350 CFM/ton(or alternative),Refrigerant Charge
❑3.All New Ducts with Replacement I Required Compliance Documents to be left on site for Final:
All New Ducts'and one or more of the following CF1R-ALT-02-E
replaced:Condenser Unit,Evaporator Coil, CF2R: MECH-OS,MECH-20-HERS,MECH-(23 or 24)-HERS,MECH-2SHERS _ y
Compressor,TXV,Lineset,Furnace' CF3R: MECH-2D-HERS,MECH423 or 24-HERS,MECH-2SHERS )
Installer Requirement:Duct leakage<6%,Air Flow 350 CFM/ton(or alternative),Refrigerant Charge
O �v
Exempted from duct leakage testing if,01. Ezatin duct terns are constructed,insulated or sealed with asbestos �� N
❑4.New Ductfng over 40 feet Required Compliance Documents to be left on site for Final: §D xo h
New ducting but less than All New Ducts' CF1R-ALT-02-E,CF2R: MECH-2D-HERS,CF3R: MECH-20-HERS
Installer Required to:Duct leakage(<15%or,<10%to outside or,or seal all accessible leaks) V m
❑ EXCEPTION:Existing duct systems constructed,insulated or sealed with asbestos. t/)
'All new ducting R-8 required when more than 40 It installed and R-6 when less than 40 It installed. This includes in walk,between floors etc.
'Heating only systems and Air Handler/Furnace changes do not require Air Flow MECH-(23 or 24),or Refrigerant Charge verification MECH-25
'All New Ducts is when at least 75 percent of the duct system is new duct material,and up to 25 percent may consist of reused parts from the
dwelling unit's existing duct system(e.g.,registers,grilles,boots,air handler,coil,plenums,duct material)
i R-5(1"thick insulation)for linesets 1"and less. R-7.5(1.5"thick insulation)for linesets over 1 inch. Most mfg will require Suction line Diameter
with insulation as the following 1.5-2T-2%",2.5-3T-2%",3.5 to 4T-23/.",5T-4%"
Contractor(Documentation Author's/Responsible Designer's Declaration Statement)
I certifythe following under penalty of perjury,under the laws of the State of California:
1. The information provided on this Certificate of Compliance is true and correct.
2. 1 am eligible under Division 3 of the California Business and Professions Code to accept responsibility for the information on this document.
3. That the energy features and performance specifications for the design identified on this Certificate of Compliance conform to the
requirements of Title 24,Parts 1 and 6 of the California Code of Regulations(CCR).
4. That the energy features and performance specifications,materials,components,and manufactured devices for the building design or
system design identified on this Certificate of Compliance conform to the requirements of Title 24,Part 1 and Part 6 of the COL
5. The building design features or system design features Identified on this Certificate of Compliance are consistent with the information
provided on other applicable compliance documents,worksheets,calallations,plans and specifications submitted to the enforcement
agency for approval with this building permits plimtion.
Responsible Designer Name: Respn a gner SlgnaW Date Signed: License:
Corn ny: A clry/Siatem!". Phone:Us�,r/ilsn cf.si7l�7•r.j+ 11 of �'-nit ui9 n+v it Z) ''1 r/ -7@f 747 1,
For assistance or questions regarding the Energy Standards,contact the Energy Hotline at:1.800-772-3300
STATE OF CALFORNIA .t /..
ALTERATIONS - HVAC
CEC-CFIR-ALT4°4-E Revised 06114 CALIFORNIA ENERGY COMMISSION
CERTIFICATE OF COMPLIANCE CFIR-AM04-E
Alterations-HVAC CZ 2,and 8-15(formerly CF-IR-ALT-HVAC) (Pag
Site Address: Enforcement Agency: Date Prepared: Permit#:
New Ducting,Plenums,Lineset. Conditioned
Equipment Type Equipment Efficiency Required R-value Floor Area(sq ft) Thermostat
❑Packaged System ❑Evaporator CoilAFUE COP R-6 (CZ2,8-13)Ducting Served by system ❑Setback
❑Split System ❑Condensing Unit ❑R-8' (CZ 11,14,15)Ducting sgft (If not already
,QMini Split ❑Compressor )SEER _HSPF ❑R-6(all CZ's)Plenums present must
❑Furnace ❑Lineset EER ❑R-5 or R7.5)Lineset' be installed)
❑TXV
HERS VERIFICATION SUMMARY Installer determines work to be completed and matches to one of the options below. At permit application this N
form is allowed to be filled out by hand. For final inspection all forms are to be registered(no hand filled forms allowed)and a copy left on site.
❑1.HVAC Changeout/Repair Required Compliance Documents to be left an site for Final:
All Equipment, CFIR-ALT-02-E
Condenser Unit,Evaporator Coil, CF2R: MECH-01,MECH-20-HERS,MECH-(23 or 24)'-HERS,MECH-25-HERS' O
Compressor,TXV,Lineset, CF3R: MECH-20-HERS,MECH-(23 or24)-HERS',MECH-25-HERS'
Air Handler/Furnace'(Can include new ducting)
Installer Requirement:Duct leakage L15%,or<10%to outside,or seal all accessible leaks),Air Flow 2 300 CFM/ton,Refrigerant Charge.
Exempted from duct leakage testing if:
❑1.Duct system registered with HERS provider as previously sealed,or❑2.There is less than 40 linear feet of duct in unconditioned space,or CA
❑3.Existing duct systems are constructed,insulated or sealed with asbestos(list manufacture date of building I
❑2.New HVAC System Required Compliance Documents to be left on site for Final:
All new equipment and All New Ducts' CFIR-ALT-02-E
including Mini Split CF2R: MECH-01,MECH-20-HERS,MECH-22-HERS,MECH-(23 or 24)-HERS',MECH-25-HERS'
CF3R: MECH-20-HERS,MECH-22-HERS,MECH-(23 or 24)-HERS',MECH-25-HERS'
Mini Splits require CFIR-ALT-02-E,CF2R-MECH-01,and (CF2R-CF3R)MECH-25-HERS
Installer Requirement:Duct leakage<6%,Fan Efficacy(.58W/CFM),Air Flow 2 350 CFM/ton'(or alternative),Refrigerant Charge
❑3.All New Ducts with Replacement Required Compliance Documents to be left on site for Final: �.•
All New Ducts3 and one or more of the following CF1R-ALT-02-E O
replaced:Condenser Unit,Evaporator Coll, CF2R: MECH-01,MECH-20-HERS,MECH-(23 or 24)-HERS,MECH-25-
Compressor,TXV,Lineset,Furnace' CF3R: MECH-20-HERS,MECH-(23 or 24)-HERS,MECH-25-HERS V 4
Installer Requirement:Duct leakage<6%,Air Flow z 350 CFM/ton(or alternative),Refrigerant Charge 4Q
Exempted from duct leakage testing if:❑1. Existing duct systems are constructed,insulated or sealed with asbestos �j o
114.New Ducting over 40 feet I Required Compliance Documents to be left on site for Final:
New ducting but less than All New Ducts' I CFIR-ALT-02-E,CF2R: MECH-20-HERS,CF3R: MECH-20-HERS
Installer Required to:Duct leakage(: 15%or,<10%to outside or,or seal all accessible leaks)
❑ EXCEPTION:Existing duct systems constructed,insulated or sealed with asbestos.
'All new ducting R-8 required when more than 40 ft installed and R-6 when less than 40 ft installed. This includes in walls,between floors etc.
'Heating only systems and Air Handler/Furnace changes do not require Air Flow MECH-(23 or 24),or Refrigerant Charge verification MECH-25
'All New Ducts is when at least 75 percent of the duct system is new duct material,and up to 25 percent may consist of reused parts from the
dwelling unit's existing duct system(e.g.,registers,grilles,boots,air handler,coil,plenums,duct material)
4 R-5(1"thick insulation)for linesets I"and less. R-7.5(1.5"thick insulation)for linesets over 1 inch. Most mfg will require Suction line Diameter
with insulation as the following 1.5-2T-2%",2.5-3T-2%",3.5 to 4T-N/.",5T-4y"
Contractor(Documentation Author's/Responsible Designer's Declaration Statement)
I certify the following under penalty of perjury,under the laws of the State of California:
1. The information provided on this Certificate of Compliance is true and correct.
2. 1 am eligible under Division 3 of the California Business and Professions Code to accept responsibility forthe information on this document.
3. That the energy features and performance specifications for the design identified on this Certificate of Compliance conform to the
requirements of Title 24,Parts 1 and 6 of the California Code of Regulations(CCR).
4. Thatthe energy features and performance specifications,materials,components,and manufactured devices for the building design or
system design identified on this Certificate of Compliance conform to the requirements of Title 24,Part 1 and Part6 of the CCR.
S. The building design features or system design features identified on this Certificate of Compliance are consistent with the information
provided on other applicable compliance documents,worksheets,calculations,plans and specifications submitted to the enforcement
agency for approval with this building permit applicatio
Responsible Designer Name: Responsible Des er Si d'atur j Date Signed: License:
aO Ct1Am JAIWn ,1 ,��/- 9- s I ,4 SSif
Company: Address: City/State/Zip- Phone:
SD><( S r}•i`co. D�'}v.�n ` b`1 Iccnn L� /jr..,-�f; LA °/r�.f"1 off •�ul 7z�G
For assistance or uestions regarding the Energy Standards,contact the Energy Hotline at:1-800-772-3300