PMT17-04565 City of Menifee Permit No.: PMT17-04565
29714 HAUN RD.
�CCEL/-> MENIFEE,CA 92586 Type: Residential Mechanical
MENIFEE Date Issued:
12128/2017
PERMIT
Site Address: 28846 ERIDANUS DR, MENIFEE, CA Parcel Number: 339-352-022
92586 Construction Cost: $5,451.00
Existing Use: Proposed Use:
Description of REPLACE 75,000 BTU FURNACE ONLY
Work:
Owner Contractor
SERGIO SALICIDO W C HEATING&AIR CONDITIONING INC
28846 ERIDANUS DR 41085 GOLDEN GATE CIR
MURRIETA, CA 92562
Applicant Phone: 9516000700
STEVEN SCHNIERER License Number:779604
W C HEATING&AIR CONDITIONING INC +�
41085 GOLDEN GATE CIR a�!
MURRIETA, CA 92562
Fee Description City Amount 151
Forced-Air or Gravity-Type Furnace or Burner 1 149.00
Building Permit Issuance 1 27.00
GREEN FEE 1 1.00
SMIP RESIDENTIAL 1 1.00
General Plan Maintenance Fee-Mechanical 1 7.45
$185.45
The issuance of this permit shall not prevent the building official from thereafter requiring the correction of errors in the plans and
specifications or from preventing builiding operations being carded on thereunder when in violation of the Building Code or of any other
ordinance of City of Menifee.Except as otherwise stated,a permit for construction under which no work is commenced within six
months after issuance,or where the work commenced is suspended or abandoned for six months,shall expire,and fees paid shall be
forfeited.
AA_Bldg Permit_Template.rpt Page 1 of 1
SAFETY PERMIT/PLANAPPLICATION
c
_ Menifee
DATE: Iz aalv-� PERMIT/PLAN CHECK NUMBER
TYPE: O COMMERCIAL ,QeELESIDENTIAL O MULTI-FAMILY O MOBILE HOME 0 POOLISPA O SIGN
SUBTYPE: O ADDITION O ALTERATION O DEMOLITION O ELECTRICAL / AECHANICAL
O NEW O PLUMBING O RE-ROOF NUMBER OF SQUARES
DESCRIPTION OF WORK
PROJECTADDRESS ZIP qZSal-
ASSESSOR'S PARCEL NUMBER 352 - c52;;>_ LOT TRACT
OWNER NAME
ADDRESS z; 6sgv, CA a125gb
PHONE EMAIL
APPLICANT NAME �t-
ADDRESS 3\Zz-5 CA gL3(e2_
PHONE 4'S�g--1.35-`�8"7l� EMAIL
CONTRACTOR'S NAME OWNER BUILDER? O YE O
BUSINESS NAME Lac
ADDRESS c{108S Go e sNe :`- .xri,4c. CA QZ.S(oZ
PHONE 9SI - L<)0- D-?OLD EMAIL
CONTRACTOR'S STATE LIC NUMBER LICENSE CLASSIFICATION G2-�
VALUATION$ ! , 451 -CU SO FT L SO FT
APPLICANT'S SIGNATURE -?� �— DATE 12 I z•s��1
CITYSTAFF:USE ONE
DEPARTMENT DISTRIBUTION CITY OF MENIFEE BUSINESS LICENSE NUMBER
ACCEPTED BY:
BUILDING PLANNING ENGINEERING FIRE
PERMIT FEE SMIP GREEN.
PLAN CHECK FEE INVOICETOTAL
OWNER BUILDER VERIFIED O YES J NO DRIVERS LICENSE# NOTARIZED LETTER O YES 0 NO
City of Menifee Building &Safety Department 29714 Houn Rd. Menifee, CA 92586 951-672-6777
www.cityofinenifee.us
AL I th2A IIUNS - HVAC
CEC-CFIR-ALT-04-E Revised 01/16 CALIFORNIA ENERGY COMMISSION
CERTIFICATE OF COMPLIANCE CFIR-ALT-04-E
Alterations-HVAC CZ 2,and 8-15 (Page 1 of 1)
Site Address: Enforcement Agenc�(: Dat Pre ared: Permit#:
Z8H�ft� �kr, cla,"Qs �� G I� C� �rniL IZ 22 I
Equipment Type Equipment Efficiency New Ducting orUneset: Conditioned Thermostat
Required R-value Floor Area(fe)
❑Packaged ❑Evaporator Coll ❑R-6 (CZ 1-10,12&13)Ducts Served by system Setback
System ❑Condensing Unit AFUE COP 0 R-8' (CZ 11,14-16)Ducts f bOc7 ft2 (If not already
❑Split System ❑Compressor _SEER -HSPF 0 z R-2.8 Lineset4 present must
❑Mini Split ❑Lineset EER be installed)
`Furnace ❑TXV
HERS VERIFICATION SUMMARY Installer determines work to.be completed and matches to one of the options below. At permit application this
form is allowed to be filled out by hand. For final inspection all forms are to be registered(no hand filled forms allowed)and a copy left on site.
1.HVAC Changeout/Repair Required Compliance Documents to be left on site for Final:
All Equipment, CF111-ALT-02-E
Condenser Unit,Evaporator Coll, CF2R-MCH-01-E,MCH-20-H,MCH423 or 24)'-H,MCH-25-H'
Compressor,TXV,Lineset, CF3R-MCH-20-H,MCH-(23 or 24)-H2,MCH-25-1,1'
Air Handler/Fumace'(Can include new ducting)
Installer Requirement:Duct leakage(<15%,or<__SO%to outside,or seal all accessible leaks),Air Flow 2 300 CFM/ton,Refrigerant Charge.
Exempted from duct leakage testing if:
❑1.Duct system registered with HERS provider as previously sealed,or 0 2.There is less than 40 linear feet of duct in unconditioned space,or
❑3.Existing duct systems are constructed,insulated or sealed with asbestos(list manufacture date of building
❑2.New HVAC System Required Compliance Documents to be left an site for Final:
All new equipment and All New Ducts' Glll-ALT-02-E
including Mini Split CF2R-MCH-01-E,MCH-20-H,MCH-22-H,MCH-(23 or 24)-H2,MCH-25-H'
CF3R-MCH-20-H,MCH-22-H,MCH-(23 or 24)-H2,MCH-25-H'
Mini Splits require CF1R-ALT-02-E,CF2R-MCH-01-E,and(CF2R-CF3R)MCH-25-H
Installer Requirement:Duct leakage 55%,Fan Efficacy(0.58W/CFM),Air Flow 2 350 CFM/ton(or alternative),Refrigerant Charge
❑3.All New Ducts with Replacement I Required Compliance Documents to be left on site for Final:
All New Ducts'and one or more of the following CF1R-ALT-02-E
replaced:Condenser Unit,Evaporator Coil, CF2R-MCH-01-E,MCH-20-H,MCH-(23 or 24)-H,MCH-25-H
Compressor,TXV,Lineset,Furnace CF3R-MCH-20-H,MCH-(23 or 24)-H,MCH-25-H
Installer Requirement:Duct leakage<5%,Air Flow 2 350 CFM/ton(or alternative),Refrigerant Charge
Exempted from duct leakage testing if:0 1. Existing duct systems are constructed,insulated or sealed with asbestos
❑4.New Ducting over 40 feet Required Compliance Documents to be left on site for Final:
New ducting but less than All New Ducts' CKR-ALT-02-E,CF2R-MCH-20-H,CF3R-MCH-20-H
Installer Required to:Duct leakage(5 15%or,510%to outside or,or seal all accessible leaks)
❑ EXCEPTION:Existing duct systems constructed,insulated or sealed with asbestos.
'All new ducting requires R-8 insulation when more than 40 ft installed in CZs 11&14-16 and R-61n CZs 1-10,12&13,and R-6 insulation when less
than 40 ft installed.This includes in walls,between floors etc.
'Heating only systems and Air Handler/Furnace changes do not require Air Flow MCH-(23 or 24),or Refrigerant Charge verification MCH-25
'All New Ducts is when at least 75%of the duct system is new duct material,and up to 25%may consist of reused parts from the dwelling unit's
existing duct system(e.g.,registers,grilles,boots,air handler,coil,plenums,duct material)
4 R-2.8(1"thick insulation)for linesets 1"and less.
Contractor(Documentation Author's/Responsible Designer's Declaration Statement)
I certify the following under penalty of perjury,under the laws of the State of California:
1. The information provided on this Certificate of Compliance is true and correct.
2. 1 am eligible under Division 3 of the California Business and Professions Code to accept responsibility forthe information on this document.
3. That the energy features and performance specifications for the design identified on this Certificate of Compliance conform to the
requirements of Title 24,Parts 1 and 6 of the California Code of Regulations(CCR).
4. That the energy features and performance specifications,materials,components,and manufactured devices for the building design or
system design identified on this Certificate of Compliance conform to the requirements of Title 24,Part 1 and Part 6 of the CCR.
S. The building design features or system design features identified on this Certificate of Compliance are consistent with the Information
provided on other applicable compliance documents,worksheets,calculations,plans and specifications submitted to the enforcement
agency for approval with this building permit application.
nslble oez ridame: onsI11e Desl 'gnature: Date S gne License:
•` Iz 22 r-1 -1 196C)4
o pony• Address: C' /State/bp: Phone:
Ca vlws GO 8� C A� C;r 4 CA cMs"N2 cys)-GOD-o'7c�D
For assistance or questions regarding the Energy Standards,contact the Energy Hotline at:1-800-772-3300