Loading...
PMT17-01561 City of Menifee Permit No.: PMT17-01561 29714 HAUN RD. -CXCCEl-/? MENIFEE, CA 92586 Type: Sign-Permanent MENIFEE Date Issued: 0511812017 PERMIT Site Address: 26025 NEWPORT RD, MENIFEE,CA Parcel Number: 360-M 1-027 92584 Construction Cost: $7,000.00 Existing Use: Proposed Use: Description of INSTALL ONE ILLUMINATED CHANNEL LETTER SIGN"ARMY CAREER CENTER" Work: Owner Contractor TIARNA REAL ESTATE SIGN SPECIALISTS CORPORATION 3550 VINE STREET,#130 111 W DYER ROAD UNIT F RIVERSIDE, CA 92507 SANTA ANA, CA 92707 Applicant Phone:7146410064 JAIME COLCHADO License Number:988048 SIGN SPECIALISTS CORPORATION 111 W DYER ROAD UNIT IF SANTA ANA, CA 92707 Fee Description qty, Amount lEl Sign Permit 1 190.00 Building Permit Issuance 1 27.00 GREEN FEE 1 1.00 General Plan Maintenance Fee-Building 1 9.50 $227.50 The issuance of this permit shall not prevent the building official from thereafter requiring the correction of errors in the plans and specifications or from preventing builiding operations being carried on thereunder when in violation of the Building Code or of any other ordinance of City of Menifee.Except as otherwise stated,a permit for construction under which no work is commenced within six months after issuance,or where the work commenced is suspended or abandoned for six months,shall expire,and fees paid shall be forfeited. AA_BIdg_Permit Template.rpt Page 1 of 1 CITY OF MENIFEE LICENSED DECLARATION property who builds or improves thereon,and who contracts for the projects I hereby affirm under penalty of perjury that I am under provisions of with a licensed contractors)pursuant to the Contractors State License Law). Chapter9(commencing with section 7000)of Division 3 of the Business and o I am exemptfrom licensure under the Contractor's State License Law for Professions Code and my license is in full force and effect. p� the following reason: License Class C-`f r Ucense C-k yK By my signature below I acknowledge that,except for my personal residence Expires /D-3/-/7 Signature in which I must have resided for at least one year prior to completion of WORKER'S COMPENSATION DECLARATION improvements covered by this permit.I cannot legally sell a structure that I have built as an owner-builder if it has not been constructed in its entirety by Rfl hereby affirm under penalty of perjury one of the following declarations:I licensed contractors.I understand that a copy of the applicable law,Section have and will maintain a certificate of consent of self-insure for worker's 7044 of the Business and Professions Code,is available upon request when compensation,issued by the Director of Industrial Relations as provided for this application Is submitted or at the following website: by Section 3700 of the tabor Code,for the performance of work for which yM,yr.leginfo.ca.gov/calaw.htmi.permit is issued. Policy# CI LA'C 7/Y2,9-S- Date ,el have and will maintain workers compensation insurance,as required by PROPERTY OWNER OR AUTHORIZED AGENT section 3700 of the Labor Code,for the performance of the work for which D By my signature below(certify to each of the following:I am the property this permit is issued.My worker's compensation Insurance carrier and policy owner or authorized to act on the property owner's behalf.I have read this number are:� application and the information I have provided is correct.I agree to comply Carrier C��/ P'rCCi; with all applicable city and county ordinances and state laws relating to T building construction.I authorize representatives of this city or county to Policy# 6/fNC7jL/2$ r Expires -17 enter the above identified property for inspection purposes. (This section need not to be completed is the permit is for one-hundred Date dollars($100)or less PROPERTY OWNER OR AUTHORIZED AGENT J51 certify that in the performance of the work for which this permit is issued, I shall not employ any persons in any manner so as to become subject to the CITY BUSINESS LICENSE# worker's compensation laws of California,and agree that if I should become HAZARDOUS MATERIAL DECLARATION subject to the worker's compensation provisions of Section 3700 of the Labor Code,I shall fortji it mply with those provisions. Will the applicant or future building occupant handle hazardous material or a 57���—)7 mixture containing a hazardous material equal to or greater that the Applicant Date_1 amounts specified on the Hazardous Materials Information Guide? WARNING: AI LURE TO SECURE WORKER'S COMPENSATION COVERAGE IS ❑Yes o No UNLAWFUL,AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES Will the intended use of the building by the applicant or future building AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS($100,000),IN ADDITION TO THE COST OF COMPENSATION,DAMAGES AS PROVIDED FOR occupant require a permit for the construction or modification from South IN SECTION 3706 OF THE LABOR CODE,INTEREST,AND ATTORNEYS FEES Coast Air Quality Management District(SCAQMD)?See permitting checklist for guidelines CONSTRUCTION LENDING AGENCY ❑Yes D No I hereby affirm that under the penalty of perjury there Is a construction Will the proposed building or modified facility be within 1000 feet of the lending agency for the performance of the work which this permit is Issued outer boundary of a school? (Section 3097 Civil Code) O Yes D No OWNER BUILDER DECLARATIONS I have read the Hazardous Material Information Guide and the SCAQMD hereby affirm under penalty of perjury that I am exempt from the permitting checklist.I understand my requirements under the State of Contractor's License Law for the reason(s)indicated below by the California Health&Safety Code,Section 25505 and 25534 concerning checkmark(s)I have placed next to the applicable item hazardous material reporting.$)(Section 7031.5 DYes o No Business and Professions Code).Any city or county that requires a permit to Date construct,alter,improve,demolish or repair any structure,prior to Its PROPERTY OWNER OR AUTHORIZED AGENT issuance,also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State EPA RENOVATION,REPAIR AND PAINTING(RRP) License Law(Chapter 9(commencing with Section 7000)of Division 3 of the The EPA Renovation,Repair and Painting(RRP)Rule requires contractors Business and Professions Code)or that he or she is exempt from licensure receiving compensation for most work that disturbs paint In a pre-1978 and the basis for the alleged exemption.Any violation of Section 7031.5 by residence or childcare facility to be RRP-certified firms and comply with an Applicant for a permit subjects the applicant to a civil penalty of not more required practices.This includes rental property owners and property than($500). managers who do the paint-disturbing work themselves or through their ❑I,as owner of the property,or my employee with wages as their sole employees.For more information about EPA's Renovation Program visit: compensation,will do( )all of or( )portion of the work,and the structure is www.epa.eov/lead or contact the National Lead Information Center at not intended or offered for sale.(Section 7044,Business and Professions 1-800-424-LEAD(5323). Code,The Contractor's State License Law does not apply to an owner of D An EPA Lead-Safe Certified Renovator will be responsible for this project property who,through employees'or personal effort,builds or improves the property provided that the improvements are not intended or offered for Certified Firm Name: sale.If,however,the building or improvement is sold within one year of Firm Certification No.: completion,the Owner-Builder will have the burden of proving that it was not built or improved for the purpose of sale. ❑No EPA Lead-Safe Certified Firm is required for this project because: o 1,as owner of the property am exclusively contracting with licensed contractors to construct the project(Section 7044,Business and Professions Code:The Contractor's State License Law does not apply to an owner of a If your project does not comply with EPA RRP rule please fill out the RRP Acknowledgement. APPLICATIONBUILDING & SAFETY PERMIT/PLAN CHECK Menifee DATE PERMIT/PLAN CHECK NUMBER TYPE: O COMMERCIAL O RESIDENTIAL O MULTI-FAMILY O MOBILE HOME O POOL/SPA *•SIGN SUBTYPE: O ADDITION O ALTERATION O DEMOLITION O ELECTRICAL O MECHANICAL O NEW O PLUMBING O RE-ROOF-NUMBER OF SQUARES (' DESCRIPTION OF WORK AV vn r ec:Y ✓- L.c. v,e I eJ` Rug ( W� if (� Eluildin enifee ut PROJECTADDRESS 260 2 ,AJew r+ Olt O� o & S3�tY 0 pt. ASSESSOR'S PARCEL NUMBER ',QQ a%-C,-I LOT TRACT MAYV OWNER NAME Ti^,r e, tee.l ADDRESS 3SSO �w k. 13 0 Vc '�zS-07 IV� PHONE (/$-l) I,S�Q -11 Cf/g-q EMAIL APPLICANT NAME JM,V,.0 Co I CV 1,fo ADDRESS ( G/. rr KIL *1E !>�0044k AVa. Ca. 927C77 PHONE EMAIL `rlwV`t , �olGLlns�o�G eGfw i�-S.c w CONTRACTOR'S NAME Ii,j OWNER BUILDER? O YES O BUSINESS NAME ,e e%I. fc,4- '/ ADDRESS /// ! Kal #�' - 5c, 44A A pLLca Cw, / 2. 7© PHONE (711?)o111 -6I 0 EMAIL CONTRACTOR'S STATE LIC NUMBER el K LICENSE CLASSIFICATION VALUATION$ 7600, 0 FT l sv. Ff L SQ FT APPLICANT'S SIGNATURE DATE S--1S-(7 i . - - . . DEPARTMENT DISTRIBUTION CITV OF MENIFEE BUSINESS LICENSE NUMBER BUILDING PLANNING ENGINEERING FIRE GREEN SMIP h INVOICE I PAIDAMOUNT O O AMOUNT 0CASH CHECK CREDITCARD VISA/MC PLAN CHECK FEES PAID AMOUNT O CASH O CHECK k O CREDIT CARD VISA/MC OWNER BUILDER VERIFIED O YES 0 NO DL NUMBER NOTARIZED LETTER O YES O NO City of Menifee Building&Safety Department 29714 Haun Rd. Menifee, CA 92586 951-672-6777 www.cityofinemfiee.us Inspection Request Line 951-246-6213 r. STATE OF CALIFORNIA /t �r SIGN LIGHTING � U ��VjV(�/ CEC-NRCC-LTS-01-E(Revised 08116) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE NRCC-LTS-01-E Sign Lighting (Page 1 of 5) Proled Name: Date Prepared: / � r P� ev1. r — l S,,I. Clty of Menitee A.General Information BURRO Project Address: o 240IS- MAY 16 2017 Location of Sign ❑Outdoor Signs ❑Ind or Signs Phase of Sign Construction ❑New Signs ❑Sign Alterations �p�y�3�? p Type of Lighting Control ❑New Lighting Controls ❑Replaced Lighting Controls ❑Not Installing Lif l,9CSnfrols This Certificate of Compliance includes the following components(check all that apply): R Mandatory measures(Lighting Controls) Maximum Allowed Lighting Power OR Specific Lighting Sources 1. Mandatory Sign Lighting Controls NOTES., 1. The same responsible person may install both the sign lighting power and the sign lighting controls, or a different responsible person may install the sign lighting controls than the responsible person installing the sign lighting power. 2. The Mandatory Measures (sign lighting controls) are required for compliance with the sign lighting Standards. If the person responsible for installing the sign lighting power is not also responsible for the sign lighting controls, then the owner of the sign, general contractor,or architect shall be responsible to have the sign lighting controls installed. 3. If more than one person has responsibility for compliance, each responsible person shall prepare and sign a Certificate of Compliance and an Installation Certificate applicable to the portion of construction for which they are responsible,alternatively, the person with chief responsibility far construction shall prepare and sign the Certificate of Compliance Declaration Statement for the entire construction (e.g. a C-10 contractor may complete parts 1a and 1b on one compliance document and a C-45 contractor may complete parts 2a and 2b on a separate compliance document—the Responsible Designer shall submit the two compliance documents together for the same complete installation). I have responsibility for installing the sign lighting controls: ❑Yes,I have responsibility for the sign lighting controls,and will J2 No,I do not have responsibility for installing the sign lighting controls. complete parts la and 1b of this compliance document Someone else will complete parts la and lb of this compliance document. la.Check Yes or No for all of the following statements: 1 There are existing sign lighting controls that comply with the applicable provisions of§110.9 and§130.3 ❑Yes R No There are no existing sign lighting controls and I will be installing sign lighting controls that comply with the applicable 2 provisions of§110.9 and §130.3 ❑Yes EZ No There are existing sign lighting controls that do not comply with the applicable provisions of§110.9 and§130.3 and I will be 3 installing sign lighting controls that comply with the applicable provisions of §110.9 and§130.3 ❑Yes Ja No CA Building Energy Efficiency Standards-2016 Nonresidential Compliance August 2016 STATE OF CALIFORNIA SIGN LIGHTING CEC-NRCC-LTS-Ot-E(Revised 66116) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE NRCC-LTS-01-E Sign Lighting (Page 2 of 5) proles came: rn Ce ,- Date Prepared p, lb.Mandatory Sign Lighting Controls If the person signing the Certificate of Compliance Declaration Statement on this NRCC-LTS-01-E is responsible for complying with the sign lighting control requirements,that person shall answer all of the followingquestions; If there are construction documents,indicate where on the building plans the mandatory measures(sign lighting control)note block can be located: 1 §130.3(a)1.All indoor sign lighting is controlled with an automatic time-switch control or astronomical time- Y N NA switch control. O O §130.3(a)2A. All outdoor sign lighting is controlled with a photocontrol in addition to an automatic time- Y N NA 2 switch control,or an astronomical time-switch control. 0 O O EXCEPTION to Section 130.3(a)2A:Outdoor signs in tunnels,and signs in large permanently covered outdoor Y NA areas that are intended to be continuously lit,24 hours per day and 365 days per year. O O' §330.3(a)28. All outdoor sign lighting that is ON both day and night is controlled with a dimmer that provides the ability to automatically reduce sign lighting power by a minimum of 65%during nighttime hours.Signs that Y N NA 3 are illuminated at night and for more than 1 hour during daylight hours shall be considered ON both day and O O night. EXCEPTION to Section 130.3(a)2B:Outdoor signs in tunnels and large covered areas that are intended to be y NA illuminated both day and night. O §330.3(a)3. Demand Responsive Electronic Message Center Control.An Electronic Message Center(EMC) Y N N/A having a new connected lighting power load greater than 15 kW has a control installed that is capable of 4 reducing the lighting power by a minimum of 30%when receiving a demand response signal. o O EXCEPTION to Section 130.3(a)3:Lighting for EMCs that is not permitted by a health or life safety statute, Y NA ordinance,or regulation to be reduced by 30%. © a Feld Inspector Notes: CA Building Energy Efficiency Standards-2016 Nonresidential Compliance August 2016 STATE OF CALIFORNIA SIGN LIGHTING CEC-NRCC-LTS-01-E(Revised 06/16) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE NRCC-LTS-01-E Sign Lighting r' (Page 3 of 5) Prated Name: fn f v— McPrepared: 2.Mandatory Sign Lighting Measures I have responsibility for installing the sign lighting ❑Yes,I have responsibility for the sign lighting,and will complete ❑No,I do not have responsibility for Installing the sign lighting.Someone parts 2a and 2b of this compliance document else will complete parts 2a and 2b of this compliance document. 2a.Maximum Allowed Lighting Power Method of Compliance Certificate of Compliance and Field Inspection Energy Checklist. Complete this part if there are signs using the maximum allowed lighting power method of compliance.(Complete part 2b of this Certificate of Compliance if there are signs using the Specific Lighting Sources method of compliance). A B C D E F G H I i OPTIONAL— Field Energy Verified Symbol or Design Complies Inspector Code Description of the Sign Label(see Allotted Watts Watts Y/N Check that instructions Sign Complies below) c� ° w m W m = - a33 3LL o m e a N m y x c w w in c W Q c w F 3 0 ®° IS 12- a 1 J?'0 Y ❑ ❑ o ❑ ❑ o ❑ ❑ 0 ❑ ❑ 0 ❑ ❑ 0 ❑ ❑ 0 ❑ ❑ 0 ❑ ❑ 0 ❑ ❑ 0 ❑ A Symbol or code used on the plans(when plans are required)and other documents. B A description of the sign,or location of sign on the building;and the location of sign on construction documents. OPTIONAL-Check this box only if this sign has a permanent,pre-printed,factory-installed,ENERGY VERIFIED label,confirming that the sign complies with the Section 140.8 of the California 2016 Title 24,Part 6 Standards,using the Maximum Allowed Lighting Power method of compliance. The only labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks C authorized by Underwriters Laboratories(U L)or other Product Certification Body accredited to ISO/IEC Guide 65 by the American National Standards Institute in accordance with ISO/IEC 17011.Surveillance by the Accredited Certification Body shall be an ongoing annual inspection program carried out by a Type A Inspection body in accordance with ISO/IEC 17020.For signs with such an ENERGY VERIFIED label,columns'D'through T are not required to be filled out.Note:Using an ENERGY VERIFIED label is an optional method to validate compliance.An ENERGY VERIFIED label is not needed for compliance. D The sign area in square feet. E List"I"if the sign is internally illuminated. List"E"if the sign is externally illuminated. F Allowed watts per square foot. Enter 12 if the sign is listed as"I"in column E.Enter 2.3 if sign is listed as"E"in column E. G Multiply the square footage in column D times the allowed Lighting Power Density(LPD=watts)in column F. H Show the total installed watts in the sign,as determined according to the applicable provisions of§130(c). I Enter Y if the number in column H is less than or equal to the number in column G. Otherwise,the sign does not comply. 1 This page doubles as a field inspection checklist. Field Inspector Notes: CA Building Energy Efficiency Standards-2016 Nonresidential Compliance August 2016 STATE OF CALIFORNIA SIGN LIGHTING CEC-NRCC-LTS-01-E(Revised 08116) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE NRCC-LTS-01-E Sign Lighting (Page 4 of 5) proiett Name: rvA JCCV' Ce oam Prepared: 5 _ �-/ 2b.Specific Lighting Source Method of Compliance J Certificate of Compliance and Field Inspection Energy Checklist Complete this part if there are signs using the Specific Lighting Source method of compliance.(Complete part 2 of this Certificate of Compliance if there are signs using the maximum allowed lighting power method of compliance) A B C D E OPTIONAL ENERGY Specific light source used for Symbol VERIFIED compliance Field Inspector or Description label Shall include only lighting Check that Sign Code (see technologies listed below Complies instructions (List all that apply) below) as CLA-t I be-NYr ❑ 7 LCD ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ A Symbol or code used on the plans(when plans are required)and other documents. B A narrative description of the sign,or location of sign on the building;and the location of sign on construction documents OPTIONAL-Check this box only if this sign has a permanent,pre-printed,factory-installed ENERGY VERIFIED label,confirming that this sign complies with the Section 140.8 of the California 2016 Title 24,Part 6 Standards,using the Specific Lighting Source Method of Compliance. The only labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks authorized by Underwriters Laboratories C (UL)or other Product Certification Body accredited to ISO/IEC Guide 65 by the American National Standards Institute in accordance with ISO/IEC 17011.Surveillance by the Accredited Certification Body shall be an ongoing annual inspection program carried out by a Type A Inspection body in accordance with ISO/IEC 17020.For signs with such an ENERGY VERIFIED label,column W is not required to be filled out.Note:Using an ENERGY VERIFIED label is an optional method to validate compliance.An ENERGY VERIFIED label Is not needed for compliance. Specific Light Source Compliance Method. The sign(s)Identified above use only the following lighting technologies: List all applicable numbers(1 through 9)that apply in column D above for each row. 1 High pressure sodium lamps Metal halide lamps that are pulse start or ceramic served by a ballast that has a minimum efficiency of 88%or greater. 2 Ballast efficiency is the measured output wattage to the lamp divided by the measured operating input wattage when tested according to ANSI C82.6-2005.. Metal halide lamps that are pulse start that are 320 watts or smaller, are not 250 watt or 175 watt lamps,and are 3 served by a ballast that has a minimum efficiency of 80%. Ballast efficiency is the measured output wattage to the lamp divided by the measured operating input wattage when tested according to ANSI C82.6-2005. Neon or cold cathode lamps with transformer or power supply efficiency greater than or equal to a minimum efficiency of 75%when D 4 the transformer or power supply rated output current is less than 50 mA.The ratio of the output wattage to the input wattage is at 100%tubing load. Neon or cold cathode lamps with transformer or power supply efficiency greater than or equal to a minimum efficiency of 68%when 5 the transformer or power supply rated output current is 50 mA or greater.The ratio of the output wattage to the input wattage is at 100%tubing load. 6 Fluorescent lighting systems meeting one of the following requirements:A.)Use only lamps with a minimum color rendering index (CRI)of 80;or B.)Use only electronic ballasts with a fundamental output frequency not less than 20 kHz. r9 7 efficiency Light emitting diodes(LEDs)with a power supply having an eciency of 80%or greater. Single voltage external power supplies that are designed to convert 120 volt AC input into lower voltage DC or AC output,and have a 8 nameplate output power less than or equal to 250 watts,shall comply with the applicable requirements of the Appliance Efficiency Regulations(Title 20). Compact fluorescent lamps that do not contain a medium screw base sockets(E24/E26). E This page doubles as a field inspection checklist. Field Inspector Notes: CA Building Energy Efficiency Standards-2016 Nonresidential Compliance August 2016 STATE OF CALIFORNIA SIGN LIGHTING CEC-NRCC-1-TS-01-E(Revised 00/16) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE NRCC-LTS-01-E Sign Lighting (Page 5 of 5) III came: f,VA u _r � Date Preared: 5 ( 6 l 17 DOCUMENTATION AUTHOR'S DECLARATION STATEMENT 6 1. 1 certify that this Certificate of Compliance documentation is accurate and complete. Documentation uthoIName: Documentation Author 5igna twC o(CUa e Company:Sc vt eCi Signature Date: S Address: 11 CEACertification Identification(if applicable): W. C.- ICOI. � �� Ory/State/L Phone: RESPONSIBLE PERSON'S DECLARATION STATEMENT I certify the following under penalty of perjury,under the laws of the State of California: 1. The information provided on this Certificate of Compliance is true and correct. 2. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design or system design identified on this Certificate of Compliance(responsible designer). 3. The energy features and performance specifications,materials,components,and manufactured devices for the building design or system design identified on this Certificate of Compliance conform to the requirements of Title 24,Part 1 and Part 6 of the Califomla Code of Regulations. 4. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents,worksheets,calculations,plans and specifications submitted to the enforcement agency for approval with this building permit application. S. I will ensure that a completed signed copy of this Certificate of Compliance shall be made available with the building permit(s)issued for the building,and made available to the enforcement agency for all applicable inspections.I understand that a completed signed copy of this Certificate of Compliance is required to be included with the documentation the builder provide to the building owner at occupancy. Responsible De goer Name: /I �,1 Responsible Des ig a[ure: tVM G (f&(ofa�G Company: s N C G t`- t'l+ Date Signed: S7-l/S-^(-7 Address: w. c r 9d. license: / n,..r O 4 1 City/State2ip ' y Phone: �/u G�^�/!^OQ� q,vl lM1.G -727d / -/ CA Building Energy Efficiency Standards-2016 Nonresidential Compliance August 2016