PMT16-02126 U y of Menifee Permit No.: KATM-02126
29714 HAUN RD.
�ACCEL/l� MENIFEE,CA 92586 Type: Residential Electrical
MENIFEE Date Issued: 07N8/2016
P E R H � T
Slte Address: 27958 BLACKHAWK RD, MENIFEE, CA Parcel Plumber: 336-480-018
92585 Construction Cost: $10,000.00
Existing Use: Proposed Use:
Description of INSTALL ROOF MOUNTED SOLAR SYSTEM, 12 PANELS, 1 INVERTER, 3.30 kW
Work:
Owner Contractor
RICK WRIGHT SUNRUN INSTALLATION SERVICES INC
27958 BLACKHAWK ROAD 775 FIERO LANE STE 200
MENIFEE, CA 92585 SAN LUIS OBISPO, CA 93401
Applicant Phone:8886576527
JORDAN AUDIFFEREN License Number:750184
SUNRUN INSTALLATION SERVICES INC
775 FIERO LANE STE 200
SAN LUIS OBISPO, CA 93401
Phone:7607986548
Fee Description Qtv Amount($I
nall Commercial 1 252 00
Building Permit Issuance 1 27.00
Flan Review Electrical 153 157.50
GREEN FEE 1 1.00
SMIF 1 2.00
General Plan Maintenance Fee-Electrical 1 12.60
$452.10
The issuance of this permit shall not prevent the building official from thereafter requiring the correction of errors in the plans and
specifications or from preventing building operations being carded on thereunder when in violation of the Building Code or of any other
ordinance of City of Menifee.Except as otherwise stated,a permit for construction under which no work is commenced within six
months after issuance,or where the work commenced is suspended or abandoned for six months,shall expire,and fees paid shall be
forfeited.
AA_Bldg_Permit_Template.rpt Page 1 of 1
City Of Menifee
LICENSED DECLARATION ❑ lam exempt from Iicensure under the Contractors'State License Law for the
I hereby affirm under penalty or perjury that I am licensed under provisions of following reason:
Chapter 9(commencing with section 7000)of Division 3 of the Business and By my signature below I acknowledge that,except for my personal residence in
Professions Code and my license is in full force and effect 'L which I must have resided for at least one year prior to completion of
License Class —10 .rense.t SO I T improvements covered by this permit,I cannot legally sell a structure that I have
Expires(D'30-SIP Signatu built as an owner-building if it has not been constructed in its entirety by licensed
contractors.I understand that a copy of the applicable law,Section 7044 of the
WORKERS'COMPENSATION DECLARATION Business and Professions Code,is available upon request when this application is
submitted or at the following Web site:
[II hereby affirm under penalty is perjury one the following declarations: hftp.,//www.leginfo.m.govlmlaw.html.
I have and will maintain a certificate of consentt of self-insure for workers'
compensation,issued by the Director of Industrial Relations as provided for by Date
Section 3700 of the Labor Code,for the performance of work for which this
permit is issued. Property Owner crAulhorizedAgent
Policy# ❑ By my Signature below, 1 certify to each of the following:I am the property
❑ 1 have and will maintain workers' compensation insurance, as required by owner or authorized to act on the property owner's behalf. I have read this
section 370o of the Labor Code, for the performance of the work for which this application and the information I have provided Is correct. I agree to comply
permit is issued.My workers'compensation insurance carder and policy number are: with all applicable city and county ordinances and slate laws relating to building
construction.I authorize representatives of this city or county to enter the above-
Carrier ay-f aml identified property for the inspection purposes.
Policy#WCOI&APdQ1 Expires_ /0' 1'1(P Date
Properly Owner orAutharizedAgent }
(This section need not be completed if the permit is for City Business License# 0756110
one-hundred dollars($100)or less)
[II certify that in the performance of the work for which this perm[is issued,I HAZARDOUS MATERIAL DECLARATION
shall not employ any persons in any manner so as to become subject to the Will the applicant or future building occupant handle hazardous material or a
workers'compensation laws of California,and agree that if I should become mixture containing a hazardous material equal to or greater that the
subject to the workers'compensation provisions of Section 3700 of the Labor amounts specified on the Hazardous Materials Information Guide?
Code,I shall forthwfth ith those provisions. ❑YESNO
Apphca Date; • !S-9 Will the intended use of the building by the applicant or future building
occupant require a permit for the construction or modification from South
WARNING: FAILURE TO SECURE WORKERS' Coast Air Quality Management District(SCAQMD)?See permitting checklist
COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL for guide�lirie��s
SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND DYES C./NVO
CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS
($100,000), IN ADDITION TO THE COST OF COMPENSATION, Will the proposed building or modified facility be within 1000 feet of the outer
DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE boundary; fa school?
LABOR CODE, INTEREST,AND ATTORNEYS FEES ❑YESId0
CONSTRUCTION LENDING AGENCY I have read the Hazardous Material Information Guide and the SCAQMD
I hereby affirm that under the penalty of perjury there is a construction lending permitting checklist.I understand my requirements under the State of
agency for the performance of the work which this permit is issued(Section California Health&Safety Code,Section 25505 and 25534 conceming
3097 Civil Code) hazardous material reporting.
OWNER BUILDER DECLARATIONS l ES ❑NO
Date �'(S•��
I hereby affirm under penalty of perjury that I am exempt from the Contractors
License Law for the reason(s)indicated below by the checkmark(s)I have placed P E TY OWN OR AU TH 0 R I Z E D AG E N T
next to the applicable item(s)(Section 7031.5.Business and Professions Code:
Any city or county that requires a permit to construct,alter,improve,demolish, EPA RENOVATION,REPAIR AND PAINTING(RRP1
or repair any structure, prior to its issuance, also requires the applicant for the
permit to file a signed statement that he or she is licensed pursuant to the The EPA Renovation,Repair and Painting(RRP)Rule requires contractors
provisions of the Contractor's State License Law(Chapter 9(commencing with receiving compensation for most work that disturbs paint in a pre4978
Section 7000)of Division 3 of the Business and Professions Code)or that he or residence or childcare facility to be RRP-certfried firms and comply with
she is exempt from licensure and the basis for the alleged exemption. Any required practices.This includes rental property owners and property
violation of Section 7031.5 by any Applicant for a permit subjects the applicant to managers who do the paint-disturbing work themselves or through their
a civil penalty of not more than($500).) employees.For more information about EPA's Renovation Program visit:
roe www.epa.gov/lead or contact the National Lead Information Center at
❑ I, as owner of the p p rty, or my employees with wages as their sole 1-800424-LEAD(5323).
compensation,will do( )all of or( )porting of the work,and the structure Is
not intended or offered for sale.(Section 7044,Business and Professions Code;
The Contractor's State License Law does not apply to an owner of a property ❑An EPA Lead-Safe Certified Renovator will be responsible for this project
who, through employees'or personal effort, builds or improves the property,
provided that the improvements are not intended or offered for sale.If,however, Certified Firm Name:
the building or improvement is sold within one year of completion,the Owner-
Builder will have the burden of proving that it was not built or improved for the Firm Certification No:
purpose of sale).
❑ 1, as owner of the property an exclusively contracting with licensed No EPA Lead-Safe Certified Firm is required for this project because:
contractors to construct the project(Section 7044,Business and Professions
Code:The Contractor's License Law does not apply to an owner of a property
who builds or improves thereon, and who contracts for the projects with a
EsGil Corporation
In Tartnersbip with Government for Buifding Safety
DATE: 07/14/16 ❑ APPLICANT
❑ JURIS.
JURISDICTION: City of Menifee ❑ PLAN REVIEWER
❑ FILE
PLAN CHECK NO.: PMT16-02126 SET: I
PROJECT ADDRESS: 27958 Blackhawk Rd.
PROJECT NAME: RICK WRIGHT 3,000 Watts Solar Photovoltaic System
® The plans transmitted herewith have been corrected where necessary and substantially comply
with the jurisdiction's building codes.
❑ The plans transmitted herewith will substantially comply with the jurisdiction's building codes
when minor deficiencies identified below are resolved and checked by building department staff.
❑ The plans transmitted herewith have significant deficiencies identified on the enclosed check list
and should be corrected and resubmitted for a complete recheck.
❑ The check list transmitted herewith is for your information. The plans are being held at Esgil
Corporation until corrected plans are submitted for recheck.
❑ The applicant's copy of the check list is enclosed for the jurisdiction to forward to the applicant
contact person.
❑ The applicant's copy of the check list has been sent to:
® Esgil Corporation staff did not advise the applicant that the plan check has been completed.
❑ Esgil Corporation staff did advise the applicant that the plan check has been completed.
Person contacted: Telephone #:
Date contacted: (by: ) Fax #:
Mail Telephone Fax In Person E-mail:
❑ REMARKS:
By: Sergio Azuela Enclosures:
EsGil Corporation
❑ GA ❑ EJ ❑ PC 07/08
9320 Chesapeake Drive, Suite 208 ♦ San Diego, California 92123 ♦ (858) 560-1468 ♦ Fax(858)560-1576
City of Menifee PMT16-02126
07/14/16
[DO NOT PAY— THIS IS NOT AN INVOICE]
VALUATION AND PLAN CHECK FEE
JURISDICTION: City of Menifee PLAN CHECK NO.: PMT16-02126
PREPARED BY: Sergio Azuela DATE: 07/14/16
BUILDING ADDRESS: 27958 Blackhawk Rd.
BUILDING OCCUPANCY: TYPE OF CONSTRUCTION:
BUILDING AREA Valuation Reg. VALUE ($)
PORTION ( Sq. Ft.) Multiplier Mod.
Air Conditioning
Fire Sprinklers
TOTAL VALUE
Jurisdiction Code mnf ima.uai Input
Bldg. Permit Fee by Ordinance
Plan Check Fee by Ordinance
Type of Review: ❑ Complete Review ❑ Structural Only
❑Repetitive Fee Other
Repeats E--� 1.5 Hrs. @
EsGil Fee $105.00 $157.50
Based on hourly rate
Comments: 1 1/2 hours plan review.
Sheet 1 of 1
macvalue.doc+
City of Menifee
Building & Safety Dept.
Structural Calculations for the Rick Wright Residence PV Installation JUL 0 / 2016
Date: 6/29/2016 Received
Job Address: 27958 Blackhawk Rd
Menifee, CA 92585
Job Number: 124R-958WRIG
Scope of Work
These calculations are for the existing roof framing which supports the new PV modules as well
as the attachment of the PV system to existing roof framing. All PV mounting equipment shall
be designed and installed per manufacturer's approved installation specifications.
Calculation Index
Sheet Description
2 Structural Geometry,Live Load,Snow Load, Wind Load, Dead Load, & Roof(1) Framing (/ i
Check \�
3 Roof(1) Framing Check Continued, Roof Attachment Check,Seismic Check,&Scope of
Work
a✓
Engineering Calculations Summary
Code: 2013 California Building Code
ASCE 7-10
Snow Load: S= 0 psf
Live Load: LL= 20 psf
Wind: Wind Speed Ult.(V) = 110 mph Exp.= C
PV Dead Load: DPV= 3.0 psf
Q�p SSlpp
Sincerely, a t
h P T
co No70 s
Sage Lopez, P.E. * E"P/
Civil Engineer Engineer cr.&
Sunrun, lnc
OF CAUL
133 Technology Dr.,Suite 100, Irvine,CA 92618 1 P 949.393.0993
Engineer:SVL
Date:6/29/2016
Job: 124R-958WRIG
Address: 27958 Blackhawk Rd
Menjfee,CA 92585
2of3
Structrure Geometry:
Mean Roof Height,hn = 22 ft
Eave Height,h. = 18 ft
Buiding Length,L = 45 ft
Building Width,B = 40 ft
Module Area = 20 ft'
Roof Pitch,B = 22 degrees
Live Load:
Roof Live Load,Lr = 20.00 psf Equation 4.8-1
Snow Load:
Ground Snow Load,pe = 0 psf Fig.7-1
Wind Load:
Basic Wind Speed(3s-gust) = 110 mph Figure 26.5-1A
Building Occupancy Category = 2 Table 1.5-1
Exposure Category = C Sec 26.7.3
Topographlc Factor,Kzr = 1.00 Equation 26.8-1
Adjustment Factor,T = 1.35 Figure 30.5-1
Edge Zone,a = 4.00 ft Figure 30.5-1
Uplift(0.6W) Zone 1(psf) Zone 2(pso Zone3(psf)
Pn.e30 = -19.40 -31.90 47.90 Figure 30.5-1
Pn.f=0.6 x A x Kzr x Pn eo) = -15.71 -25.84 -38.80 Equation 30.5-1
Downward(0.6W) Zone 1(psf) Zone 2(psf) Zone 3(psf)
Pn.uo = 11.40 11.40 11.40 Figure 30.5-1
Pn.e=0.6 x)x KZr x Pneso = 9.60 9.60 9.60 Equation 30.5-1
Dead Load:
Roof 1 :
Roof Walls-Exterior
Flat rile 9.0 psf Stucco 10.0 psf
5/8 OSB Sheathing 2.0 2x4 Studs @ 16" 2.0
2x4 Truss @ 24"OC 1.0 Gypsum 3.0
' Misc.(Ceiling,Insulation,etc) 1.0 Misc.(Insulation,etc.) 2.0
PV System,Pw 3.0
Total Roof DL= 16.0 psf Total Wall DL= 17.0 psf
• Rooflll Framine Check:
Roof Framing = 2x4 Truss @ 24"OC
Timber Species = Doug Fir-Larch 82
Max Beam Span = 5.00 ft
b = 1.50 in
d = 3.50 in
Moment of Inertia,I. = 5.36 in'
Section Modulus,S. = 3.06 in'
Bending Stress,Fb = 900 psi
Elastic Modulus,E.M = 580000 psi
CD(Wind) CD(Snow) Cu Cm Ce
Wood Adjustment Factors: 1.60 1.15--T 1.00 1.00 1.00
CL CF cf. G Cr
1.00 1.5 1.00 1.00 1.15
133 Technology Dr.,Suite 100, Irvine,CA 92618 1 P 949.383.0993
„= ..
Engineer:SVL
rP
Date:6/29/2016
Job:124R-958WRIG
Address:27958 Blackhawk Rd
Menifee,CA 92585
3of3
Roof(1)Framing Check Continued:
PV Tributary Width,War = 2.75 ft
PV Tributary Length,Lpr = 6.00ft
PV Tributary Area,At = 16.50 fit
PV Dead Point Load,Po=Parx At = 46 lb
Roof Distributed Load,wDL = 24 plf
Load Case: 0.6DL+0.6W (CD=1.6)
Roof Zone = 1
Pup=P.txAt+0.6xPoxcos(8) = 2321b
MbW-, upl = 216 lb-ft
Fb'(mndl=Fb xCo XW xCM XG xQ xCFxCru xG xG = 2484 psi
M.ii.bk=S.x W(MM) = 634 lb-ft > 216 OK
Load Case: DL+0.6W (CD=1.61
Pdp =Pnetx At+Pox MS(e) = 2041h
Mb(rd.d d.l = 305 lb-ft
Fb'(MM)=Fb xCo xCts xCM xCt XOL xCFxCry xO xG = 2484 psi
MaN.W.=S.x W(MM) = 634 lb-ft > 305 OK
Rafter Attachments:0.6D+0.6W(Zone 21
Pupch=Atx Pnegz) = 426Ib
5116”Lag Screw Withdrdwl Value = 266 lb/in Table 11.2A-Nos
Lag Screw Penetration = 2.50 in
Allowable Capacity with Co = 1064 lb > 426 OK
Seismic Check:
Existing Dead Load: Solar Dead Load:
A�ure.�eun¢ = 1800 ft2 Wwnei = 42 It,
Wmore.istft = 23400 lb Numwnel = 12
Aw Fle.isnn¢ = 3060 ft2 Wpa" tat = 504 lb
Wrnne.mms = 52020 lb Wbue = 118 lb -
Wmnl = 754201b W.mr = 622 lb
%increase=Lwmtai+wamv)/wto i = 76042 '100%-100% = 0.82% "
75420
"The increase in weight as a result of the solar system is less than 10%of the existing structure and therefore no further seismic analysis
Is required.
Limits of Scope of Work and Liability
we have based our structural capacity determination on applicable building codes,professional engineering inspection and design
experience,opinions and judgments.The calculations produced for this dwelling's assessment are only for the proposed solar panel
installation referenced in the stamped plan set and were made according to generally recognized structural anlaysis standards and
procedures.
133 Technology Dr.,Suite 100, Irvine,CA 92618 1 P 949.383.0993
\gym LL
j � kam�
ER (k! �z�
�� ca•k §z() §
& ¥��
� , , , , \/k[ ~ ` \
§§ \-
�� k }
§® ! w
;§¢ % »
\22CL
\ )
§ §
§§ )� )( 2 \ \
ze & I $ §- ' !` | G
z Zb ,P � k.0 \ \
�k
§ < §k 222� ® § ce ce§ Ln
j� z) w��� \
g (§ \/([ §� kk(B ( `
` ]§
§
§ () �( ° \ !
£ ° 4
2
§P
k
k� � (
0z )w § � • !
§ § Enua K ! «
M k§ § � )
/ 2 b) �§ § §E zq q
tn
\ §, §\ zk §$ §( ) }
E� z
12e EL g§ g§ ! | \
§ /\§§§
r /U5 W /f
2~®�2@
eww
«>wzz z f00! !emul§6
P \ �/\
4
`1
fl'
REC
TWINPEAK BLK
SERIES
PREMIUM SOLAR PANELS
WITH SUPERIOR PERFORMANCE
REC TwinPeak BLK Series solar panels feature an
innovative design with high panel efficiency and
power output,enabling customers to get the
most out of the space used for the installation
Combined with industry-leading product P
quality and the reliability of a strong and
established European brand,REC TwinPeak
BLK panels are ideal for residential and
commercial rooftops worldwide
PIG
e
i
1
r „y
MORE POWER HIGHER 100% REDUCES BALANCE OF
OUTPUT PER M ENERGY YIELD PID FREE SYSTENICOSTS
MrMTESSIV'iL1$"?3rY4.AS�
REC TWINPEAK BLK 5ERIEr-
EPPCB\v
33
YEAR PRODUCT WARRANTY
- YEAR LINEAR POWER
OUTPUT WARRANTY
m Mountingholes R �TYr L� US HPORT DUTY FREE
0A360%
•^'• �� 47 Nominal Operating Cell Temperature(NOCT) 44.6'C(t2'C)
r`766 Temperature Coefficientof P1. -0.39%/'C
.;%,. ut Temperature Coefficient ofVc, -0.31%/'C
Temperature Coefficient offlx 0.045%/'C
All measurements in Inches
REC27OTP REC27STP REC28OTP
NominalPower-P.(Wp) 265 270 275 280 Cell type: 120 REC HCmulti-crystalline
Watt Class Sorting-(W) 0/+5 0/+5 0/+5 0/+5 6 strings of20 cells Wx3')
NomiozlPovwrVoltage-V.(V) 313 31.2 31A 31.9 Glass: 1/8'mmsolarglasswith
NomioalPowerOurrent-I (A) 8.53 8.66 8.76 g.7g anti-reflective surface treatment
Backsheeh Double layerhlghlymsistantpolyester(white)
OpenClrcuitVoltage-V.(V) 383 3B.6 38.8 39.2
Frame: Anodized aluminum(black)
ShortCircuitCurrent.l,(A) 921 9.29 9.40 9.44 Junctionbox: apart withbypass diodes
Panel Efficiency(%) 16.1 16.4 16.7 17.0 IP67rated
Analy4 mm-solar cable,35'.47'
Valueseddatadrd tostratestions ST%efpaneAM1.5.cedheve arrant and nce1000W/ma.altageamp.ranceofs3%homnaminal values. Connectors: Multi-Ccmoact MC44mm'
Values a[standard mstcondlHans 6Tt!dMUSSAM LS,irradiance 1000 W/m;[all temperature25'C). ( )
At low Irradlance of 200 W/m'(AM 15 and cell temperature 2M atleast 94%of the STC panel effideney will be achieved
Origin: Made in Singapore
:i
NominalPower-P.(Wp) 195 198 202 205 Operational Temperature: -40...+85'C
Numinall'owel-Voltage-V.(V) 28.75 28.85 29.03 29.49 Maximum System Voltage: 1000V
Nominall'owerCurrent-1 (A) 6.77 6.87 5.95 6,97 Design Load*: 75.2ibs/ft'(360OPa)
OpenCicuitVoltage-V,(V) 35.25 35.53 35.71 36.08 33.4lbs/ft'(160DPa)
'Referminstallationmanual
ShortCucuitCurrent-1,(A) 732 7.38 7.47 750 MaxSenes Fuse Rating: I5A
Nominal operatingcell temperature N0CT(800W/m',AMIS,windspeedl m/s,amblenttemperature 20'C). Max Reverse Current: 15A
oSH� / / /,\ 2year linear oweranty.outp Dimensions: 651/fz39x3//fin =
5 (`C �O�E (m x.de ressi power pert rmanceanty Area: 173/+h'
(max.degressianin perfarmanceof0.7%p.a.). Weight: 391/21bs
UL7703,-Fire dassin eg
[ation Type
IEC61215,IEC61730: Note! All given specifications are subject to change "2
IEC617al(Selt Misr-smwtylevelsl&6) without notice at anytime.
REC is the largest European brand of solar panels,with more than 15 million high-quality panels produced at the end of 2014.With integrated a�rr
manufacturing frompolysilicon to wafers.cells,panels and turnkey solar solutions,REC strives to help meet the world'sgrowing energy needs. REC
In partnership with a sales channel of distributors,installers,and EPCs,REC panels are installed globally.Founded in 1996,REC is a Bluestar
Elkemcompanywithheadquarters in Norwayand operational headquarters in Singapore.REC's 1,800 employeesworldwidegenerated revenues
ofUSD680million in2014. www.recgroup.com
NOTICE OF COMPLETION
AND
AUTHORIZATION TO APPLY THE UL MARK
Sunrun South Llc, Dba Snapnrack 09/2412015
Greg McPheeters
775 Flero Ln
Suite 200
San Luis Obispo Ca 93401,United States
Our Reference: File E359313,Vol. i Project Number 4786982467
Your Reference: 14914
Project Scope: Adding REC Solar PTE. LTD.(NRTL)models: REC260, REC265, REC270, REC275,
REC280,all followed by TP to Series 100 and 200 Mounting and Bonding Systems
Adding Hanwha O.CELLS GmbH(NRTL)models: Q.BASE-GY XXX,Q.PRO-GY XXX,
Q.PLUS-GYXXX,Q.PRO BFR-GYXXX,Q.PRO BLK-GYXXX,Q.PRO-GY/SC XXX,where
Y is the generation number between 1 and 9,where XXX is the power output from 205 W to
295 W to Series 100 and 200 Mounting and Bonding Systems
Dear Greg McPheeters:
Congratulationsl UL's investigation of your product(s)has been completed under the above Reference Number and
the product was determined to comply with the applicable requirements. This letter temporarily supplements the UL
Follow-Up Services Procedure and serves as authorization to apply the UL Mark at authorized factories under UL's
Follow-Up Service Program. To provide your manufacturer(s)with the intended authorization to use the UL Mark,
you must send a copy of this notice to each manufacturing location currently authorized under File E359313, Vol.1.
Records in the Follow-Up Services Procedure covering the product are now being prepared and will be sent in the
near future. Until then,this letter authorizes application of the UL Mark for 90 days from the date indicated above.
Additional requirements related to your responsibilities as the Applicant can be found in the document"Applicant
responsibilities related to Early Authorizations"that can be found at the following web-site:
htto:/IYwv-ul.com/EAReSDonsibilifies
Any information and documentation provided to you involving UL Mark services are provided on behalf of UL LLC
(UL)or any authorized licensee of UL.
We are excited you are now able to apply the UL Mark to your products and appreciate your business. Feel free to
contact me or any of our Customer Service representatives if you have any questions.
Very truly yours, Reviewed by:
Long Vo Bruce A.Mahrenholz
847-664-3009
Engineer Project Associate CPO Director
Long.Vo@ul.com Bruce.A.Mahrenholz@ul.com
NBKBDCB-1F9491
I
This is an electronically generated letter.Signatures are not required for this document to be valid. Page 1 of 1
n
MECHANICAL INSTALLATION
.•2 FIRE t'U�ELtNES
RECPeakEnsegy Serispanels have a CtassCType I Fire dasslficatim The lVeraft.ofthis pane!sonlyvatdwhenmaunt d to tf em3 nersoaCh?ed n
thesemechanialmauntNgfnstn cdons.UtiGaethe following EtesahEygutdeGhe.vd en instatltng RECPeakEr ergyStrtespanals
Checkwlthtocalauthoritiesfarfire rafetygutdelines andrequkementsfor any tndldingorst utare onto v"O thepane(swill beinsmile i
Thes}siem design should ensure thaHtcan bs easilyacussed'inthe eventaf awWngtice,
CheckweYhtacalautha itiesforappUcableregulat[onscancerntngsetkacksocotter pWcementrestrkttans[hatmay apply
ForroniMwmKtdatays
^ Thause¢ffKgroundfaultintemtptetsorecammendedTnamaya(sabeeequired6�otacafandnaWaatcadas.
• AllelechicalapptlatKesareafireriskThepaaelshaultlthere(acebemauntedo.�erafieeretardantmaimveringratedfortheappl'tcatia*an4a
suitable dtstatmeof 4Wbetween thepanet and the mountingsurfaceaRowfngfreecircufationof atr beneath thepansts.shoutdhattspectedatalt
tinter,
ORIENTATkkf
Ta maximuesystemoutpuCpanets sh¢uldbeinsal[eda[theoptlnwrnvrtenatianand tHEatgis,Thespedncs of this dependw 1vaEanandonae
catcutatedbya quah@edsystemdesgw,,Atower angte of paWlasaUbtfactinmases Uierequirentantforceguie dea(iN.
The optimalmouri tttgposidanof panelsresultsht the sun§raysfallingpetpeadicu[ar((e.at90•j to the surface.Adpanets inn stringshoutd,W+ecever
passible have thesameorienatian andtfl[to entire Ne systemdoesnatunderperfcrmdue to mismaEchedoutputs,
Thspaneis tmrstnoiheatpasal.varamcWify wnoan:aeecfsurltghe '
ENVIRON MENTAL FACTORS
RECPeakEneryrySeriespattelsaredestgned to providedecadesaf doable and stabteoutput Operadngtemparattaesshauidbe between•40and 105•F
(-00 and i-&SCI.
The panels are not suitable forinstalladon in potentially hazardoustoatioastwr should theybe Installed In the fallowing locations,
• Near sources of flammable gases orvapars
• Nearopere0ames.
• Underwatercrinrvaterfeatures.
WtI eexposed to sufte¢near sulfursprings ccvolannes.
• Wherethepane(s maybe exposed to harmfulchemiafs;
t Ensma panels amnot exposed todirectcamaetwUh sairwaeerlspray and amid htstallationirramasatbjea to highsalemfscconte�a.g.
c¢astelareas.
PANECHANl)UNG
Panelssboutdbehandledwithcare.Allwarn gsmdtnstructbiT.ortthepadm tgshoukfbeobserved FolfmvtheseguldelineswhenumecM:g
transporting or storing the panels
• RecordtheserWtmtmberspriortoNstalWtionand note the.informationbthesystemducumenattom
• Carrythepanetsusfngbothhandsindavotdusingthefuncttuaboxasa,grip.
• Do not allow the panelstosagarbawuuderthefrovm welgh[whenbeingarded.
• Do not subjectthepaoelstoloadsorstressese,g,lea&gorplacing,heavyobjectsmtherm
• Donotstandonthapane(serausekapactthmughdropp(ngthem.
Keepa(f electrlal contacts clean anddrK
• Storepanetslna dry andpruperlyventilated mom.
• Donot apply force tathebadcsheet
• Avoldusing sharp orpofntedahfectstFpaneisrequiremarkiog.
• Neverappiypalnte,adhestvasardetergentsto the backafthelaminate.
• Oonotusemysolarpanelthat(sdamagedarbeentampefed:with.
• Neverattem ittodisassembtethepanets, '
fEtfrepaaetfmntglass is hr+otenor6amfnote hadtsheetis damaged,Itarteapase Qarsonnaltvhazardans wltages.
a•�£a..eL �.t•txv
9/29/2015 Series 100 UL&Series 200 UL I SnapNrack
Our system just, • •
•ur UL 3 Listed SySteM
is • •
lass A Fire Rated
fdr Type I & 2 modules
M '
t ' LEARN MORE
L— r� �, _. -��{C�L"Cr y 1 �Jc � � i�-�7'r,,•F� :i (�
UL 2703:Class A Fire Rating Compliance
In addition to grounding and bonding,the roof mount system,Series 100 UL,is Class A Fire Rated when installed with Type i and Type 21 Modules.
SnapNrack's UL 2703 Certification and Compliance ensures that SnapNrack partners can continue to provide the best in class Installations in quality and
safety.
SnapNrack achieved our Class A Fire Rating through stringent testing that included the Spread of Flame tests and the Burning Brand tests.This achievement
certifies that the SnapNrack Series 100 UL system maintains a Class A Fire Rating when installed with Type I and Type 2 modules. This also ensures that the
system meets the requirements of the California Building Codes set by local jurisdictions and the 2012 International Building Codes which became mandatory
on January 3,2015.
M.dula type rlaatrications are dNermined by conswuian apeduwtans.and at.^suas lNmugh use UL 170s Ln ia,.Mare nntom:ndan an the requlremenu for Vasa Afim mon,x Li lmm.and VI.
]Ipa can Le GmndA ate rnilmvNRta'ebsac:MrpJ,nsvnvsoLanbcs.osylabouVpnblioeWrsmporlaglanunabllityieatM1grutls�.Mat
iU1 SnapNrack_Series_100 Brochure.pdf M 42 KB
it SnapNrack Series 100 UL Installation Manual.pdf 1798 NIB
J'SnapNrack Serles_200_Brochure.ptif 138 M8
rl 5200 Install Manual.pdf 8.93 hill
'S SnapNrack_ConversionSheet.pdf 313.34 KB
FJ SnapNrack_UL_2703_Fire Classification TedL_Bulletin.pdf 1.09 NIB
SnapNrack Series 100 UL&200 UL System Identification Technical Bulletin.pdf 375.04 RB
�ll SnapNrack Series 100 UL Certificate of Compliance.pdf 33182 KB
Di SnapNrack Series 200 UL Certificate of Compliance.pdf 331.81 RB
91 mis Series 100 UL&Series 200 UL I SnapNrack
Call us: 877-732-2860
Snag ,"rack- Residential, Configurel'oursystem• Whereto➢uy Resources, About-
home.Resources•SedM 1m ULffi Sedea 20a UI.
Series 100 UL & Series 200 UL
UL 2703: Grounding and Bonding Compliance
At SnapNrack we have expanded our product Une with our new Series 100 UL and Series 200 UL.➢ull%systems are fully fisted to the UL 2703 Standard for
Grounding and Bonding,with the Of.listing,all system components bare been certified by UL for electrical continuity.eliminating the need for additional
grounding hardware. If there ever was the situation where a lire conductor contacted a metallic component of the mounting system or array,the array
would remain imenergized.
New Features of Series 100 UL and Series 200 UL
Bonding pins are included in producl assemblies including module clamps and rail splices.
eliminating the need for bonding washers or splice jumpers.
SnapNrackgrounding lug is a fully custom solution for grounding the mnipleted system.
Only one lug is required per individual row of modules(not per mill.The lug is secured with
a single 5ilT bolt just like every other component in the system and requires no drilling of
derail„ L LISTED
A key component of the listing is our new bonding channel nuts,which provide electrical
continuity into our anodized rails. PV mounting System
2703
Mill finish specification on key components such as standoffs and metal roof seam clamps.
Benefits of Series 100 UL and Series 200 UL
The UL 2703 Luting is a huge benefit to distributors and installers of SnapNrack product.A rew
benefits include:
A Fully Certified System
The entire system,including all components,is now bonded together.In other mounting systems on the market,some clamps,rooranchors.
flashing&etc.aren't truly bonded to ground,and therefore not fully code compliant.
Overall Reduction in Material Costs
With the UL Listed product,we have added features into our components that ensure an adequate banding path,and In turn this has eliminated the
need for grounding lugs and washers at each module.and bonding jumpers between splices.
Dramatic Reduction in Labor
With the elimination of grounding and bonding jumpers on the army,installations should have a dramatic improvement in efficiency.reducing
installations by 1 hrikly or more.
Quality&Safety
SnapNrack installations using our UL product ensures that even metallic component on the system is banded to ground the system
See below for a library of supporting documents to help assist with ordering and installing Series 100 UL and Series 200 UL.
solar -
SolarEdge Single Phase Inverters
For North America
SE3000A-US / SE380OA-US / SE5000A-US / SE6000A-US /
SE760OA-US / SE10000A-US / SE1140OA-US
xpv erte,
�1225
veean�Y n
c�Ylart �
h '
� Q
A e
The best choice for SolarEdge enabled systems
Integrated arc fault protection (Type 1)for NEC 2011 690.11 compliance
— Superior efficiency(98%)
— Small, lightweight and easy to install on provided bracket
— Built-in module-level monitoring
— Internet connection through Ethernet or Wireless
— Outdoor and indoor installation
— Fixed voltage inverter,DC/AC conversion only
— Pre-assembled Safety Switch for faster installation
— Optional—revenue grade data,ANSI C12.1
USA-GERMANY-ITALY-FRANCE-JAPAN-CHINA-AUSTRALIA-THE NETHERLANDS-ISRAEL www.solaredge.us
Single Phase Inverters for North America
solar=@@
SE3000A-US/SE3800A-US/SE5000A-US/SE6000A-US/
SE760OA-US I SE1000GA-US/SE114DOA-US
_ SE3000A-US SE3800A-US SE5000A-US ISE6000A-US I SE760GA-US I SE10000A-US SE11400A-US
OUTPUT
Nominal AC Power Output 3000 3800 5000 6000 7600 9980 @ 208V 11400 VA
........................................ ... ........... .............. ................ .................................10000 @240V. ................. ..........
5400 @ 208V 10800 @ 208V
Max.AC Power Output 3300 4150 6000 8350 12000 VA
........................................ ...............L............, 5450�La 240V. L...............I 10950 @24DV. . L..-......
AC Dutput Voltage Min:Nom:Mau.'°
183-208-229 Vac .L. ..... .............. ..... ...
...............
AC Output Val[age Min:Nom:Max."l ✓ J ✓ ✓ ✓ ✓ J
211-240-264 Vac L.............L._............ .................L.............. L.........
...........*n'c*y ....................... ............ . ................................ .. ..
AC Frequency Min:Nom.-Maz."' 59.3 (with HI country setting 57;60:60.5) Hz
Max.Continuous Output Current.....L....1?.5.....
I......1.......L,21 @ 240V..L.....25......L.....3?......L..?2.�1p.240V... ......47.........L...Q....
GFDI
................ ................................ ................. .................i...
Utility Monitoring,Islanding Protection,Country Configurable Thresholds Yes
INPUT
Recommended Max.DC Power"' 3750 4750 6250 7500 9500 12400 14250 W
.................................. .............. ................ ...--........... .............-.. ................. ......-.......... .........
Transformer-less,Ungrounded Yes........... ..........................
Max,
.... ...... 1age.._................ ............... .............. ................ �......500 L..Vdc...
Nom.DC Input Voltage 325 @ 208V/350 @ 240V Vdc
16.5 @ 208V 33 @ 208V
Max.Input Current'" 9.5 13 18 23 34.5 Adc
..... ............... .............. .15:5.@.240V.L.............. ......--....-... . 3....{,1°.240V.. ...............
Max.l nput Short Circuit Current, ........... ............ ................ ........q5..... ._,.. Adc_.
.... .. ........... ................. ................. ....
Reverse-Polarity Protection Yes
IloSe...................... ................. .................I
Ground-F... ...Isolation Detection ............... . ...... . ............... 6001�Sensi[ivitY. . ...,...... .................
Maximum_Inverter.Efficiency.......... .....97:�..... .....98:?..... ......983....-.L....98.3.....i......98...... L......98....... .......... .....i.... ....
97.5 @ 208V 97 @ 208V
CEC Weighted Efficiency 97.5 98 97.5 97.5 97.5 %
.............. _............I..98,@ 240V..I. ................ . 97:5.�.240V.. ................. .... ....
........................................ ...............
N ighttime Power Consumption <Z.S <4
ADDITIONAL FEATURES
Supported Communication Interfaces RS485,RS232,Ethernet,ZigBee(optional)
........................................ .............- .... ................................ ................. ................. ..........
Revenue Grade Data,ANSI C12.1 ............... .............. ................ ... Optional"'..,-..-... .........
.Rapid
................................. .............. .. n kit is installed"'
...... .................
Rapid Shutdown—NEC 2014690.12 Functionality enabled when SolarEdge rapid shutdown k't's'nstalled191
STANDARD COMPLIANCE
.S.a.f.e.l.y....... ........................ UL1741,UL16998,UL19 98,CSA 22.2
ti.. s .... ................
.. ................. ..... . - -
..
G : neco
E- .... ... 48 ..........
missions F arti5 class
INSTALLATION SPECIFICATIONS
AC output contluit size/AWG range 3/4"mimmum/16-6AWG 3/4"minimum/8-3 AWG
..Crop. conc...'si,ze ................ ................ ................ ................. .........
DC input conduit size/d of strings/
AWG range 3/4"minimum/1-Z strings/16-6. ...AWG 3/4"minimum/1-2 strings/14-6AWG
Dimensions with Safety Switch 30.5 x12.5 x7/ 30.5 x12.5.z 7.5/ in/
.(.......1.............................. ...... ......315 x172 775 x,315x 191,. .. .:..,....,30.5 x 12.5 x10.5/775 x315 x260
Weight
775 x 23 . ........I I -,turn.„
Weight with Safety Switch.. .......... ......... SL2/23,2-...._,..L...._.. 54,7/24.7,.....,.. --.__.,..._..... ...BS.4/40.1 _ .,..,..
Cooling Natural Convection Fans(userreplaceable)
.. . . ... .... ..
Noise
<25 <50 dBA
Min.-Max,Operating Temperature
Range, -13 to+140/-25 to... (40 to+.. version
...... ....
F/-C
Protection Rating . .,.., NEMA 3R
........................................ ...... .............. ................ ................................ ................. ................. ..........
"I For othe,'pS'onal sehings please conlazt 5olarEd6e support.
GmRed to 125%for loodoes where the yearly average huge temperature a above PI'F/b'Card m 1359r for locations where a In below,77'F/2SC
For detailed information,infer to hnm//w rd INI4 f/" d d df
A higher current source may be used;the inverter will limit as input current nine values staled.
ullievenue grade inverter P/N:SEx.xxF US000li
'sl Rapid shutdown Fit PIN:SE1000 RSD 51
'o A(J version PIN:SEleW-USOOONNW
ESUDSPECRoHS
r 0 SelarEdge Technologies,Inc.All rights reserved.SOLAREDGE,the SolarEdge logo.OPTIMIZED BY SOLAREDGE
•
solar, N
SolarEdge Power Optimizer
Module Add-On For North America
OP250-LV / OP300-MV / OP400-MV / OP400-EV •
•
i
a Warcaarl _
aOv,�
•
x
i
PV power optimization at the module-level
— Up to 25%more energy
— Superior efficiency(99.5%)
— Mitigates all types of module mismatch losses,from manufacturing tolerance to partial shading
— Flexible system design for maximum space utilization
— Next generation maintenance with module-level monitoring
— Module-level voltage shutdown for installer and firefighter safety
USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - ISRAEL - AUSTRALIA www.solaredge.us
solar=ee SolarEdge Power Optimizer
Module Add-On for North America
OP250-LV/ OP300-MV/ OP400-MV/ OP400-EV
OP250-LV I OP300-MV I OP400-MV I OP400-EV
INPUT —
RatedInput DC Power* 250 300 4.00 400 W........................................................ ............ ..................... ...........................................................................
Absolute Maximum Input Voltage(Voc)..................._.. ....................5..........L....... 75._..,-..I-.......75........L.......125........L.. Vdc_...
MPPT Operating Range..........................................�.......5.:5......... .......5.:7.........�.......5.:75.......�.....15-125.....�... Vdc....
Maximum Short Circuit Current(Isc)of connected PV 10 10 10 7 Ad
Module
..................................................................... ..................... ........................................ ..................................
Maximum DC Input Current...-- - -.-,. •. ..... ............. ........12;5,,,,,,,L......125..... 12.5 I :8.75 Adc
. . ............................................�............
Maximum Efficiency 99.5 %
.... .. .......................................... .........................................�............
eig Whte. d E.ffi...ciency.................................................. 98,8
Overvoltage Category II
OUTPUT DURING OPERATION(POWER OPTIMIZER CONNECTED TO OPERATING INVERTER)
Ma.xi....mum Outpu..t.Curr. ....ent 15 Adc. . . . ........................................ ..................... ..................... ......................................................
Operating Output Voltage 5-60 Vdc
OUTPUT DURING STANDBY(POWER OPTIMIZER DISCONNECTED FROM INVERTER OR INVERTER OFF)
Safety Output Voltage per Power Optimizer 1 Vdc
STANDARD COMPLIANCE
EMC FCC Part15 Class B,IEC61000-6-2,IEC61000-6-3
...f................................................................ ..................... .......................................... .....................I-...........
Safety IEC62109-1(class II safety),UL1741...........................................................
.......... ..................... ..................... .................
Material .... .................................
................................................................. . UL-94(5-VA),UV Resistant
RoHS .................... ..................'Yes................... ...................... ..........
INSTALLATION SPECIFICATIONS
Maximum Allowed System Voltage 1000 Vdc
.... .. .............................. ................... ..................... .................................
..................... ..
Dimensions(W x L x H) I 143 x 210 x 45/5.63 x 8.26 x 1.75 mm/in
............. .. ... ................................................ ..................... ..................... ..................... ........................... .I;..
Weight.............. .. .................... ............. ....... ..................... ............... 450/.1:0..........-..... ..................... ..gr/Ib...
Input Connector................................................. ..................... MC4/Tyco/H+S/Amphenol—H4.....................�..--........
Output Wire.Type.................. ............................. ..................... ...Double insulated;,6mm'.MC4.... ....................�............
Output Wire Length 0.95/3.0 0.95/3.0 ( 1.2/3.9 1.6/6.. . m/ft
..................................................................... .......................................... ....................................... ....... .
. ....
Operating Temperature Range.................•.,,,.,,.,,-..-, ......_. .---,-..:40-+65/:40-+150 ..'C/.F_-
Protection Rating IP65 NEMA4
..................................................................... ...............
Relative Humidity 0-100 %
........ .................................................. .......................................... ......................................................
mated sTC poaet of the module.Module of up to+5%Power tolerance allowed.
PV SYSTEM DESIGN USING A SOLAREDGE INVERTER SINGLE PHASE THREE PHASE 208V THREE PHASE 480V
Minimum String Length(Power Optimizers) 8 8 18
. ................................................................... ............................. ............................. . ............. .....
Maximum String Length(Power Optimizers) I 25 ZS I 50
............................................................. ....... ............................. ............................. ............................. .........
Maximum Power per String 5250 6000 12750 I W
..................................................................... .......................................................... ............................. .........
Parallel Strings of Different Lengths or Orientations Yes
....... .... ........................ .. ...... .............. ........ ... . .. . . ...... .........
OPTIMIZED'rQ Sclar�dgo rechnolDgie.%.Inv.,All rights reserrad.SOI.AREDGE,the ScislEdge 1090,
badennel,s of their respective asneet.Date:am bradernarles or registered trademarks of SolarEdge Taclihologies,Inc.All other undernarks mentioned herein am
s
N/ All Flgp ku. i
OpenWay@CENTRON°
Cellular LTE
The smart meter for the smart grid,the OpenWay CENTRON, is now available with an
LTE Itron Cellular Module(ICM).This integrated OpenWay Cellular solution provides a
complementary communication pathway by incorporating WAN functionality—under
the OpenWay CENTRON meter cover—to connect the meter directly to the OpenWay
Collection Engine via a public wireless network.
The OpenWay CENTRON Cellular LTE FEATURES AND BENEFITS Automated Interval Data/Energy
takes advantage of new advanced 4G Usage Retrieval
LTE networks. This results in more Flexible Two-Way Communications
Receive and transmit meter interval
efficient coverage,higher bandwidth and Execute all supported reading, data for up to four unique energy values
longer network longevity.The OpenWay configuration and firmware download in intervals as small as five minutes.
CENTRON Cellular LTE includes both a functionality through user-configurable Recorded events and exceptions with
ZigBee®wireless component and an LTE schedules controlled by head-end meter each interval are also transmitted to the
ICM that can be tailored to fit your unique data management software head-end software,which interprets
needs.The module comes factory installed » Acquire readings on an on-demand basis them and logs appropriate messages
within the OpenWay CENTRON meter—the when necessary (such as time adjustments)
solution ships as one complete unit,ready
for field deployment.
Pushing Intelligence to the Edge energy flow and power outages.The Perform remote disconnects through
Enable future applications in edge OpenWay CENTRON Cellular LTE the Collection Engine by retrieving a final
intelligence by utilizing on the newest architecture provides the power outage read for a customer and then an initial
Itron Rive technology platform.By notification(PON)and tamper associated read for a subsequent customer
pushing computing power to the edge with a meter removal immediately Allow service to be disconnected or
devices,closer to where problems and upon power down.This results in two reconnected remotely as well via a
opportunities occur,we enable faster, exception messages upon power down, load-limiting service switch in the meter,
better decision making. PON and Removal tamper. eliminating the need to roll a truck to turn
Automated Register,Self-Read and
Secure Boot service on or off
TOU Retrieval The OpenWay CENTRON Cellular LTE 900 MHz ERT Reader
Configure the module to read and has the capability to validate digital „ Collect Encoder Receiver Transmitter
transmit totals,self-reads,maximum signature prior to uploading and applying (ERT)from 100G DLS Gas Modules.
demand,time-of-use(TOU)and critical any new ICM firmware. The ICM can collect consumption data
peak pricing(CPP)values and tamper counts from nearby Bi-Directional Metering y 1 OOG
Demand Reset tY Support bl-directional net metering
Capability ERT modules and report this back to the
P Collection Engine and other upstream
Perform demand resets,over the with the OpenWay CENTRON.Both
network or locally via tools or the received and delivered data metrics are systems.
demand resert switch stored in the meter and can be sent to Clock Synchronization
the utility as needed to support green- Synchronize the meter clock
Power Outage and Restoration Alarms credit electricity programs for consumers automatically when time deviation falls
u Transmit a real-time"last gasp" who own renewable energy facilities or within a user-defined boundary
notification when detecting an AC power participate in vehicle-to-grid systems
outage with built-in ultracapacitor energy Integration&Installation
storage.The meter then notifies the Automated ID Tracking
Ensure simplified installation in the field.
head-end when the AC power is restored Attach barcode labels and important The ICM is a fully integrated,under-
identifiers(such as the ICC-ID/MS- the-cover option installed within the
Service Diagnostic and Tamper ISDN)to the integrated module for
Detection Alerts OpenWay CENTRON.The solution
The OpenWayCENTRON Cellular LTE
tracking and troubleshooting purposes is shipped from the factory as one
can detecctt and report exceptions for On-Demand Reads for Move In/Outs complete unit with the module installed,
meter inversion,meter removal,reverse and Remote Disconnect ready for field deployment.
Remote disconnect available on all
singlephase Class 200 devices
HARDWARE
CPU board(CPU) 32-bit ARM processor,128MB RAM,256MB flash
Capacitor Storage Bank ICES) Supplies power for data transmissions and all functions for outage notification
ICM Modem Modem communicates with head-end using LTE and SMS Services
ZigBee Transceiver Enables communication with Home Area Network
(HAN)devices
Singlephase:Flexible dual frequency on board internal antenna for the modem and ERT available on all
Intemal/Extemal Antennas forms.
Polyphase:Multi-band internal antenna with diversity.External Omni Directional antenna for modem
available on all polyphase fors.
Tilt Detector Detects unauthorized movement or removal of the device
INPUT/OUTPUT SIGNAL
ICM Power Input Voltage Singlephase:120.240 VAC I Polyphase:120-480 VAC
Capacitor Storage Bank(CSB) 3.3V/TTL compatible asynchronous
ERTReader 900 MHz radio supports 100G Gas and 100W+Water endpoints
VERSION AND COMPATIBILITY
Meter Hardware Version 3.1
Meter Firware Verson Singlephase:SR 6.1 or higher I Polyphase:SR 6.6 or higher
OpenWayTools Compatibility Singlephase:4.00.91 or higher I Polyphase:4.20.00 or higher
OpenWay Collection Engine Compatibility Singlephase:SR 6.1 or higher I Polyphase:SR 6.6 or higher
SPECIFICATIONS
Regulatory and Industry Specifications Humidity Range Carriers Supported
FCC Part 15 Class B ° 0%to 95%non-condensing ° Verion Wireless
ANSI C37.90.1 —1989:(SWO) Accuracy ° Rogers Wireless
ANSI C12.20(Class 0.5)—1998 ° Meets ANSI 12.20 for accuracy
» PTCRB Certified class 0.5%(Singlephase)and 0.2%
Network Carrier Certified (Polyphase)
Measurement Canada Certified ° Optional Singlephase Adder:0.2%
Industry Canada Certified Accuracy Class
r, UL2735 Supported Meter Forms
Temperature Range: Singlephase without Disconnect
° Operating:[-40°C,+85°O) » CL 200: 1S,2S, 12S,25S
° Transmission(wireless):[-30°C,+70°C) ° CL 320:2S
Singlephase with Disconnect
„ CL 200: 1S,2S, 12S,25S
Polyphase
CL 20:3S,4S,9S,9S/36S,45S
CL 100:1S
CL 200:2S,12S,16S
n CL 321 12S, 16S
CORPORATE HEADQUARTERS
Join us in creafing a more resourceful world. 2111 N Moner Road
To learn more,visit ttron.com U6erly fie,WA 99019
USA
VJhiellmnstrrvaslo makatheconlent olilsmarketingmalerialsaslimelyantlaccuraleaspossibk,gronmakesnocleims.promises, Phone: 1.800.635.5461
ogaranteasaboul the accrcy campleleess,patleuyol,antlepresslytlscams fmGlilbrensa ome0 sln.such
lmaeawn , , pe , mn ehne rugmlolthtrd Fax 1.509.891.3355
partynghls.Nle,mercl»nlabitily,aMfilnesslarapanicvWrpurpose,Isgrvenwilnrespec11o1heconlentollhesamarhalingmaterials.
0Copyrigh12015.ft,M.Allrghhmaemec,101407SP-058r15
Snap rack UL LISTED
PV Mounting System
2703
F . -
i
Zp
c
4 ./,j 'I
K _
SERIES • • UL
ROOF MOUNT
SnapNrack ResidentialMounting Systems
- Code • • Installation
QIMS.E359313 -Mounting Systems,Mounting Devices, Clamping Devices and Ground ... Page 1 of 2
UL 9ULINE CERTIFICATIONS DIRFcTogy
QIMS.E359313
Mounting Systems, Mounting Devices, Clamping Devices and Ground Lugs for Use
with Photovoltaic Modules and Panels
Page Bottom
Mounting Systems, Mounting Devices, Clamping Devices and Ground Lugs for Use
with Photovoltaic Modules and Panels
See General Information for mount'-no mount'-no Systems.mountino UliviCes,Clamoina Devices d Ground Was for Use with Photovoltaic Modules and
Panels
SUNRUN SOUTH LLC,DBA SNAPNRACK E359313
775 Flem Ln
Suite 200
San Wls Obispo,CA 93401 USA
Investigated
Investigated for System Fire
Cat, for Mechanical Classification
No. Bonding Loading (A,B or Q Tested in Combination With
Photovoltaic mounting system
Series r N - UL Listed PV Modules:
350
REC Solar AS:REC214,REC215,REC22O,REC2.25,REC230,
REC235,REC24O,REC245,REC25O,REC255,REC260,REC265,
REC27O,all followed by PE,PE(BLK),PE-US,PE-US(BLK),PE Q2 or
PEQ3.
Hyundai Heavy industries Co Ltd:
HIS-MxxxMG Series-HIS-M21OMG,HIS-M213MG,His-M215MG,HiS-
M218MG,HIS-M22OMG,HIS-M223MG,His-M225MG,HIS-M228MG,
HIS-M230MG,HIS-14233MG,HiS-M235MG,HIS-1,1238MG,Hi5-
M240MG,His-M243MG,HIS-1,1245MG,HIS44246MG,HS-M25OMG,
HIS-M253MG,HIS-M255MG,HIS-M258MG,HIS-M260MG,Hi5-
M263MG,HIS-M265MG,HiS-M268MG,HIS-14270MG;
HIS-SxxxMG Series-HIS-S220MG,HiS-S223MG,His-S225MG,HIS-
S228MG,His-5230MG,HIS-5233MG,HiS-S235MG,HIS-S23BMG,
HIS-5240MG,HIS-S243MG,HIS-S245MG,HIS-S248MG,HIS-
S250MG,HIS-S253MG,HiS-S255MG,HIS-S258MG,HIS-S260MG,
HiS-S263MG,HIS-S265MG,HIS-S268MG,HIS-S27OMG,HIS-
5273MG,HIS-5275MG;
all may be followed by the suffix BK or blank.
Renesola Jiangsu Ltd:JCxxxM-24/BB Series-JC200M-24/8b,
JC2O5M-24/eb,3C230M-24/Bb,1C215M-24/Bb,3C22OM-24/8b,
JC225M-24/8b,JC23OM-24/Bb,JC235M-24/8b,JC2401,1-24/13b,
JC24SM-24/Bb,JC250M-24/Bb,JC255M-24/Bb,JC26OM-24/Bb,
Series Y N - JC265M-24/Bb,JC27OM-24/Bb.
100
Suniva Inc-MVX-235-60.5-701,MVX-240-60-5-701,MVX-245-60-
5-701,MVX-250-60-5-701,MVX-255-60-5-701,MVX-260-60-5-701,
MVX-265-60-5-701;
MVX-235-60-5-781,MVX-240-60-5-781,MVX-245-60-5-781,MVX-
250-60.5-781,MVX-255-60-5-781,MVX-260-60-5-781,MVX-265-
60-5-731;
OPT-250-60-4-800,OPT-255-60-4-800,OPT-260-60-4-600,OPT-
265-60-4-800,OPT-270-60-4-800,OPT-275-60-4.800;
OPT-250.60.4-880,OPT-255-60-4-88O,OPT-260-60-4-880,OPT-
265-60-4-850,OPT-270-60-4-BB0,OPT-275-60-4-88O.
Yingli Energy(China)Co Ltd-YLXXXP-29b Series-YL215P-29b,
YL220P-29b,YL225P-29b,YL23OP-29b,YL235P-29b,YL24aP-29b,
YL245P-29b,YL250P-29b,YL255P-29b,YL260P-29b;
YLXXXA-291b Series-YL22OA-29b,YL225A-29b,YL230A-29b,
YL235A-29b,YL240A-29b,YL245A-29b,YL250A-29b,YL255A-29b.
Trina Solar Ltd-TSM-215PAO5,TSM-22OPAO5,TSM-225PA05,TSM-
http://database.ul.com/cgi-bin/XYV/template/LISEXT/IFRAME/showpage.html?name--Q... 1/13/2015 j
QIMS.E359313-Mounting Systems,Mounting Devices,Clamping Devices and Ground ... Page 2 of 2
Series Y N — 230PAOS,TSM-23SPAOS,TSM-240PAOS,TSM-24SPAOS,TSM-
200 250PA05,TSM-255PA05,TSM-260PA05;
TSM-215PA05.05,TSM-220PA05.05,TSM-225PA05.05,TSM-
230PAOS.05,TSM-235PA05.05,TSM-240PADS.OS,TSM-245PA05.05,
TSM-250PA05.05,TSM-25SPA05.05,TSM-260PA05.05;
TSM-2ISPA05.08,TSM-220PA05.08,TSM-225PA05.08,TSM-
230PA05.08,TSM-235PA05.08,TSM-240PA05.08,TSM-245PA05.08,
TSM-250PA05.08,TSM-255PA05.08,TSM-260PA05.08;
TSM-215POOS,TS14-220PDOS,TSM-22SPD05,TSM-230PDOS,TSM-
235PD05,TSM-240PDD5,TSM-245P005,TSM-250PDD5,TSM-
255PDOS,TSM-260PD05;
TSM-215P1305.08,TSM-220PDOS.08,TSM-225PD05.08,TSM-
230PDOS.08,TSM-235PD05.08,TSM-240PD05.08,TSM-
245P005.08,TSM-250PD05.08,TSM-255PDOS.08,TSM-
260PDOS.08.
NRTL Listed PV Modules:
Hanwha SolarOne:Models HSL60P6-PB-2-230Q,HSL60P6-P8-2-
2350,HSL60P6-P5-2.240Q,HSL60P6-PB-2-245Q,HSL60P6-PB-2-
250Q,HSL60P6-PB-2-25SQ,HSL60P6413-2-260%HSL60P6-PB-2-
2650,HSL60P6-PB-2-27DQ;
HSL60P6-PB-4-230%HSL60P6-PB4-235Q,HSL6uP6-PBi-240%
HSL60P6-PB4-245Q,HSL60P6-P84-250Q,HSL60P6-PB4-255Q,
HSL60P6-PB-4-260Q,HSL60p6-PB4-265Q,HSL60P6-PB4-270Q;
may be followed by additional suffixes.
Suniva Inc-OPTXxX-6O-4-YYY,
where XXX may be numbers 240 to 270 In increments of 5;
where YYY may be 100;
OPTXXX-60-4-YYY;
where XXX may be numbers 235 to 265 in Increments of 5;
where YYY may be IBO.
Series j N j N A j Type 1 PV Modules
100
Trademark and/or Tradename:"SNAPNRACK"
Lest Undated on 2014-08-26
Ouesdons7 Print this oaae Terms of Use pane ho
®2015 UL LLC
When the UL Leaf Mark Is on the product,or when the word"Environment"Is included in the UL Mark,please search the UL Environment database
for additional Information regarding this produc s certification.
The appearance of a company's name or product In this database does not in Itself assure that products so identified have been manufactured
under UUs Follow-Up Service.Only those products bearing the UL Mark should be considered to be Certified and cowered under ULs Follow-Up
Service.Always look(or the Mark an the product.
UL permits the reproduction of the material contained In the Online Certification Directory subject to the following conditions:1.The Guide
Information,Assemblies,Constructions,Designs,Systems,and/or Certifimbons(files)must be presented in their entirety and In a non-misleading
manner,without any manipulation of the data(or drawings).2.The statement"Reprinted from the Online Certifications Directory with permission
from UC'must appear adjacent to the extracted material.In addition,the reprinted material must Include a copyright notice In the following
format:"®2015 UL LLC.
http-//database.ul.com/cgi-bin/XYV/template/LISEXT/1 FRAME/showpage.html?name—Q... 1/13/2015
SERIES • • UL
ROOF MOUNT
SolarSnapNrack Solutions
The SnapNrack line of solar mounting
solutions is designed to reduce total
installation costs. The system's technical
innovations have been proven to drive '=1
down costs and improve installation
quality on more than 350 MW of solar
installations. —
Pitched Roof Arrays Simplified
The SnapNrack Series 100 UL Roof Mount System
is an efficient, visually appealing, photovoltaic(PV) -
>.:.._,.
module installation system.Series 100 UL is Listed
to the UL Standard 2703 for Bonding, meaning that
all system components have been Certified by UL for Roof System in 4 Simple Steps:
electrical continuity, eliminating the need for additional 1) Go to the online Series 100 Configuration
grounding hardware.The System's components provide Tool (configure.snapnrack.com) and select
an adequate bonding path which has eliminated the "Yes" for UL 2703 Listed
need for grounding lugs and washers at each module,
and bonding jumpers between splices. The UL 2703 2) Identify Site Conditions (Array Tilt, Building
Listing ensures that SnapNrack partners can provide Height. Roof Type, Wind and Snow Loads)
the best in class installations in quality, safety,and 3) Build array in the online Configuration
efficiency. Tool and automatically generate a Bill of
• All bonding hardware is fully integrated into the Materials.
components 4) Place order with your distributor. Purchase
material for a single project or order in bulk
• No grounding lugs required for modules for additional savings
• Rail splices bond rails together, no rail jumpers
required
• Proprietary SnapNrack grounding lug snaps in the rail
channel, no drilling of rail or reaching for other tools
required (One Lug per individual row of modules)
• Class A Fire Rating Type 1 and 2 modules eLISTED
PV Mounting System
Patent Pending 2703
Stainless Steel SnapNrack Bonding SnapNrack Standard Rail
Stalnlessaoltwith Bolt with Split- `'� Splice Insert
Split-Lwk Washer Lock Washer
-SnapNrack Bonding ) Splice--SnapNrack
Adjustable End - SnapNrack .0,��1.�,._
Clamp Top Bonding Base :'^m..-_.SnapNrack
Mid Clamp
--SnapNrack Bonding Bonding
--Sna Nrack ^<, Channel Nut
Adjustable End P Stainless bT
Clamp Bottom , Bonding Stainless Hardware with Bolt with
Channel Nut Split Lock
� Split-Lock Washers
SnapNrack Bonding SnapNrack Bonding SnapNrack Bonding Washer
Adjustable End Clamp Mid Clamp Standard Rail Splice SnapNrack
Ground Lug 10-6AWG-
_ Copper Wire
SnapNrack Ground Lug
1 — -
-- Assembly
_ ( (ONE REQUIRED PER ROW OF
MODULES)
r
SnapNrack Bonding Universal
End Clamp(UEC)Wave
'=n ^'� •. . � \' -, �_ T-_l__ --UECPUIIStrap
UEC Wedg¢ Stainless Steel Bolt
r with Flat Washer
SnapNrack Bonding
Universal End Clamp
SnapNrack - 7
Bonding _ i ZJ',
Standoff
Clamp
Assembly
Serrated Stainless _� _SnapNrack SneoNrack Bonding
SnapNrack Channel Nut
Steel Flan a Nut Bonding
Rubber g —Stainless
Channel
Rain Collar � Flange Nu[
Serratreel Stainless— Nut
Steel Flange Bolt -SnapNrack kF Stainless
SnapNrack - 92 Degree Flange
Mill Finish L Foot Bolt
Standoff ,
- r���',."'iii—SnapNrack
SnapNrack All Purpose
Mill Finish L Foot
Standoff t.�...� SnapNrack - SnapNrack
Base(1-Hole / ;',3 SnapNrack Metal Roof
Mill Finish ��
Base Shown) Foot
/ FWshing Base Assembly
L Foot Base
SnapNrack Metal
SnapNrack Bonding SnapNrack Bonding
Roof Base with
Standoff Assembly L Foot Base with Flashing Bonding L Foot
SnapNrack • / Data Patent Pending
Materials • 6000 Series aluminum
• Stainless steel
• Galvanized Steel and Aluminum Flashing
Material Finish •Clear and black anodized aluminum
•Mill Finish on select components
Installation •Quick and efficient mounting
•Adjustable hardware to ensure clean and level finish
•All components bonded to ground with integrated bonding features
Calcs-&Certifications • Listed to UL Standard 2703 for Grounding/Bonding and Fire Classification
• Class A Fire Rating Type i and Type 2 Modules
• Stamped Structural Engineering Reports for all 50 States
Grounding • SnapNrack Grounding Lug(One Lug per individual row of modules)
Warranty • 10 Year material and worksmanship(download full details at snapnrack.com)
Snap rack-
(877) 732-2860 www.SnapNrack.com
0 Printed on recycled paper using soy based inks.
low to Configure Your System Series 100 UL
rst calculate the spans and penetration count. There is Roof . - • System
SnapNrack span calculation table on the back of this
anual. Determine site conditions: general building height, Safety Guidance
ray pitch, the wind speed, and snow load or topographical - Always wear the; proper • J
approved
mdition. Find appropriate railspan from table. safety equipment
workingwhen on a roof
pan Table Example - Safety equipment should be checked
3uilding Height 0 - 30 ft annually for wear and
array Pitch 160proper eye protection.
.012 IBC Wind Speed 120 mph - When walking on the roof avoid walking
;now Load 8 IbS/ftZ on installed rails. If this is unavoidable checl
bpo. Cond. NonebeforeL-f
!ail Span 104" - Appropriate fall protection gear should
'ail Span on 2411 spacing roof be 96" (8 ft) Extreme should '
used when - edge . - roof
io edge/corner reductions apply Yes, shaded cell
Age Zone Span 72" (6 ft)
:orner Zone Span 24" (2 ft)
30 ft. Roof Height
Table 1A:Rail Spans(in)for Roof Slopes and Tilt Angles 0-to 19' 6O63AIloy
Wind Lwd
\'ul1 IIU IIS 1'_a 1 UU 135 IJU IJS ISU 153 I(U 17U IXa 19U
+1+ IS.S 149 IX.J _'U.0 -1.6 1 23.3 1 25.1 '_(9 ]%.X JU.7 32X 379 J1.3 41,
U U -11x r uJ -
p
31) ?3 ]c 1i7i
50 39 JA fill MI HI 60 0 6(I
tel u « 5s s< ss ss ss » 55 a 5s ..
711 54 51 51 51 51 I 51 51 51 51 51 51 51 51 51 J
.11
S-Consult ` J MODULE OVERHANG Notes
tructural En ineer � (NOT TO EXCEED 25 I
/ �-�`F MODULE LENGTH) ! .
RAIL SPAN
RAIL END OVERHANG -
(NOT TO EXCEED 34%OF .-
ACCEPTABLE RAIL SPAN)
S IIf `
SERIES 100 UL 1 200 UL
IDENTIFICATIONSYSTEM
SnapNrack Residential PV Mounting Systems
September 2014
Overview
The SnapNrack Series 100 UL and 200 UL are listed to UL Subject 2703 for Bonding,
meaning that all system components have been certified by UL for electrical continuity,
eliminating the need for additional grounding hardware. The electrical continuity is
achieved through three (3) main features:
• Stainless steel bonding pins inserted into specific contact surfaces between
components
• Mill finishes on specific components to reduce electrical resistance
• Fasteners selected for improved bonding capabilities
Because these features are difficult to identify once a system is installed this bulletin
provides guidance on how to visually identify the Series 100 UL and 200 UL against other
SnapNrack mounting solutions.
Packaging Identification
l Ur
SnapNrack's primary recommendation for identifying
a Series 100 UL or 200 UL system is to check the i IIJLIfAI�I`�
component packaging. Since the individual components " urvao Y
do not bear the UL label the packaging is intended to +�+*
be the main identifier. It should be noted that Snap- ,
In Grounding Lug is stamped with the "GR" symbol,
and no other components are marked with this symbol 1 _
as specified in UL Subject 2703, Section 8.4. This (Duna ;
packaging should be kept on site and made available to
inspectors to ensure there are no questions whether the — -
components installed are part of the UL Listed system. Figure
Figure 1 shows a typical package of twenty (20) Bonding Universal End Clamps bearing
the UL Listing label. Boxes and other SnapNrack product packaging will bear the same UL
Listing label for all Series 100 UL and 200 UL components.
Product Identification
The primary feature providing an electrical bonding path
between components is a stainless steel pin installed on A
some of the mating surfaces. A mounting system being
installed with these bonding components will identify a
Series 100 UL or 200 UL installation.
Figure 2 shows the bonding pins installed at the contact
surface of the Bonding Universal End Clamp on the right, j
and the lack of pins in the non-bonding Universal End Figure 2
Clamp on the left.
Since these pins are between mating surfaces of the Series 100 UL and 200 UL
components it will be difficult to use these features as an identifier for installed mounting
systems. The additional SnapNrack bonding components can be found in the SnapNrack
UL Conversion Sheet.
Figure 3 shows a feature of the Bonding Mid Clamp that
can be used to identify a Series 100 UL or 200 UL system
after the installation. The Bonding Mid Clamp has an
open channel for the module spacer whereas the non-
bonding Mid Clamp has a closed hollow feature. Also,
non-bonding Mid Clamps will typically have a WEEB or
similar grounding washers to bond the module to the rail.
Since the UL 2703 Listing supersedes the requirement for J
additional grounding washers they are not required on
the Series 100 UL and 200 UL systems.
Figure 3
UL LISTED
PV Mounting System
2703
Snap rackw
(877) 732-2860 www.SnapNrack.com
This InlorTobw is Con`denlial cnd Propr etary.Any reprad ctian disdps re.ar use thereof is p+ppss y pmhibiled sv4hpuc vinL'pn eemmssipn of SnapNhack.In:.
0 2014 by SnapNrack PV Meuntmg System.All rights reserved.
Friday,January 31,2114
SnapNrack ^®!(lllla� IOl�ll
���0 m
O r m a n 775 Piero Lane,Suite 200
San Luis Obispo,CA 93401
(171
"Series 100 Roof Mount"Cover Letter
cheeI
To Whom It May Concern,
We have performed calculations for the 100 series roof mount PV system based on
t r u c t u r a I the information provided by SnapNrack.Included with this letter are the report and
calculations.We did the calculations in accordance with the 2012 IBC,ASCE 7-10,
2012 NDS, and guidelines slated in the Solar America Board for Codes and
Standards.
Engineer Some of the components in the SnapNrack test data were used to determine the
5022 sunrise Blvd capacity and section properties of materials. We collected the test data using the
FairOak:,CA 95628 procedures outlined in the 2012IBC Chapter 17.
(916)536-9595
(916)536-0260(rox) We included the following types of load combinations and building parameters into
1989-2013 our Calculations:
1d years ojercti•/lerrec
• ASCE 7-10 wind speeds from 110 mph to 190 for B and C exposure
categories
• ASCE 7-10 Seismic Design Category E
• ASCE 7-10 Snow Loads up to 120 psf ground snow
• Buildings with mean roof heights up to 60 foot tilt angles /roof pitches
Norman Scheel,S.E. from 0 degrees to 60 degrees.
LEED AP BD•C
[ZED AP Homes The calculations have also been completed in accordance with the 2006IBC,2009
Fc fo,c-A CF! IBC and ASCE 7-05. To use the data contained in this packet for projects that are
FellmvASCf; ,
E-mail:won0assemm being evaluated to the older ASCE 7-05 wind speeds,refer to Appendix A for a
Rob Coon wind speed conversion chart. Find the ASCE 7-05(IBC 200612009)wind speed in
Ocnrml Manager the Chart in Appendix A,identify the corresponding ASCE 7-10(IBC 2012)wind
E-msa:roxom($n can speed value,and proceed with using the charts contained in this packet with the
Steve Smith P.E. adjusted wind speed value.
Proleci Manage
E-rmil:aeaxcmi,hn nssecam In our opinion, the mounting system, outlined by SnapNrack Series 100 PV
Mounting System Code Compliance Installation Manual, is acceptable and meets
Steven Cooksey the loading requirements as stated above. See the report and calculations included
CAD Supervisor
E-mail:pna•<albssse.enm with this letter for more information.
Jackie Winslow If there are any further questions,please contact Norm Scheel eFOf ESSlO
Office Manage
Eama:iadiernsse cn n Norman Scheel PE,SE 4w y Fy
LEED-AP SD+C,LEED-AP Homes m
Fellow SEAOC o-2567
Fellow A.S.0 * UP,1213111
S
R�OFChLtFO�
JAN 31 Z014
Series 100 Snap rack-
Structural Report and Calculations
Table of Contents
Section Page
Cover Letter 1
Summary Report 2 to 17
Building Department Support Calculations
Calculations 0 to 30 ft.Mean Roof Height(6063 Rail) Cl to C15
Wind Calculations
Velocity Pressures&MFRS Cl
Component and Cladding C3
Seismic Calculations C7
Snow Loads C8
Rail Properties C9
65"PV Panel Connection to Rail C10
78"PV Panel Connection to Rail Cl 1
Lag Bolt Connection to Roof C 12
Rail Span Chart Tilt Angle 0-19 degrees C13
Rail Span Chart Tilt Angle 20-36 degrees C 14
Rail Span Chart Tilt Angle 37-45 degrees C 15
Rail Span Chart Tilt Angle 45-60 degrees C 16
Building Department Suppol4 Calculations
Calculations 31 to 60 ft.Mean Roof Height(6063 Rail) C17 to C32
Wind Calculations
Velocity Pressures&MFRS C17
Component and Cladding C19
Seismic Calculations C23
Snow Loads C24
Rail Properties C25
65"PV Panel Connection to Rail C26
78"PV Panel Connection to Rail C27
Lag Bolt Connection to Roof C28
Rail Span Chart Tilt Angle 0-19 degrees C29
Rail Span Chart Tilt Angle 20-36 degrees C30
Rail Span Chart Tilt Angle 37-45 degrees C31
Rail Span Chart Tilt Angle 45-60 degrees C32
NSSE 5022 Sunrise Boulevard Fair Oaks CA 95628(916)536.9585 Rev. 1213112013 Page 3
Series 100 Snap rack-
Structural Report and Calculations
Introduction
This report describes, illustrates, and explains the Structural Calculation Packet for
SnapNrack's Series 100 Mounting System, dated 4/12/2012. The calculations have been
performed in accordance with the 2012 International Building Code(IBC). The racking
system has been designed to withstand code-prescribed forces due to its own weigbt, the
weight of the solar panels,the snow loads,and both the wind and seismic forces.
Rail Spans
This report covers two different material options for the system rails. Although they are
both aluminum,one rail option uses a 6063 alloy(25 ksi yield)and the other uses a 6005
alloy(35 ksi yield).
Despite having different yield strengths,both types of rails support the PV panels. As for
the rails themselves,they are supported by mounting hardware which attaches them to the
roof structure with spans that are expressed in inches. Refer to the tables below for rail
spans under varying conditions of rail alloy and roof height. Shaded cells require an edge
zone adjustment(see details following charts).
Notes for Tables 1A thru 2H
1. Detennine the mean roof height, tilt angle, and rail alloy (if you are unsure, use
the 6063 alloy values). For mean roof heights less than 30 feet, use Table IA/2A
for tilt angles less than 19 degrees,Table 1 B/2B for tilt angles between 20 and 36
degrees,Table 1C/2C for tilt angles between 37 and 45 degrees, and Table ID/21)
for tilt angles between 46 and 60 degrees. For mean roof heights between 31 and
60 feet use Table IE12E for tilt angles less than 19 degrees, Table IF/2F for tilt
angles between 20 and 36 degrees,Table IG/2G for tilt angles between 37 and 45
degrees,and Table 1H/2H for tilt angles between 46 and 60 degrees.
2. Determine the wind and snow load for the project site from the building
department. Make certain to use 2012 IBC wind loads. Locate the wind load in
the table across top rows and the snow load down the left columns to find
corresponding maximum rail span.
3. For snow loads,column Pg equals the ground snow.
4. Shaded cells require application of an edge zone adjustment(details to follow).
r
NSSE 5022 Sunrise Boulevard Fair Oats CA 95629(916)536-9585 Rev.12/312013 Page 5
I
i
Series 100 Snap rack-
Structural Report and Calculations
0-30 fL Roof Height
Table SC:Rail Spans(in)for Roof Slopes and Tilt Angles 37'to 45' 6063AIloy
Wind Load
Volt 110 115 120 125 130 135 140 145 150 1 155 160 170 180 190
qh 155 16.9 18.4 20.0 21.6 233 25.1 26.9 28.8 30.7 32.8 37.0 41.5 462
P6 Ps -6,7 -73 .7.9 -8.6 .93 .10.0 •10.8 -11_6 -I2.4 -132 44.1 45,9 -11.8 -99.9
0 0 120 120 120 120 120 120 116 III I06 I 102 98 91 85 80 1
`tea, 10 8 112 111 110 IN 108 107 105 IM 103 102 I 98 9I 85 SD
e 20 IS 99 89 89 89 89 fl9 tl6 88 87 87 86 83 83 80
'4 30 23 75 75 75 75 75 75 75 75 75 75 75 75 74 7l
3
c 40 JI 66 66 66 66 66 66 66 66 66 66 66 66 66 66
m
� 50 79 60 60 60 60 60 60 60 60 60 60 60 60 60 60
Q 60 46 55 55 55 55 55 55 55 53 55 55 55 55 55 55
70 54 51 51 51 51 51 51 51 51 51 51 51 51 51 51
80 62 48 48 48 48 48 48 48 48 48 48 48 48 48 48
100 77 43 43 43 43 43 43 43 43 43 43 43 43 43 43
120 92 40 40 40 40 40 40 40 40 40 40 40 40 40 40
0-30 ft.Roof Height
Table 1D:Rail Spans(in)for Roof Slopes and Tilt Angles 46'to 60' 6053 Alloy
Wind Load
V01t 110 1 115 120 125 1 130 135 140 145 1 150 155 160 170 180 1 190
qh 155 16.9 18.4 20.0 21.6 233 25.1 269 28.8 30.7 1 32.8 37.0 41.5 463
Ps Pr 463 d9 .7.6 .82 .8.9 -9.6 .10.3 .11.0 -11.0 -17-6 .13A -153 -17.0 489
G` 0 0 120 120 120 120 118 115 I 113 I 110 1 107 105 101 94 I 88 82
5 10 g 106 Io5 104 102 101 100 98 97 96 94 93 90 In; 82
c 20 15 89 88 87 87 86 IS 84 83 82 B2 81 79 77 76
'4 30 23 75 75 75 75 75 75 75 74 74 73 72 71 70 69
3
rn 40 31 66 66 66 66 66 66 66 66 66 66 65 65 64 63
50 39 60 60 60 60 60 60 60 60 60 60 60 60 60 59
Q 60 46 55 55 55 55 55 55 55 55 55 55 55 55 55 55
O 70 54 51 51 51 51 51 51 51 51 51 51 51 A 51 51
80 62 48 4fl 49 d8 48 48 48 48 48 49 43 48 48 48
100 77 43 4l 43 43 4l 43 43 43 43 43 43 43 43 43
120 92 40 40 40 40 40 40 40 40 40 40 40 40 40 40
NSSE 5022 Sunrise Boulevard Fair Oats CA 95629(916)536.9585 Rev.I251/2013 Page 7
Series 100 Snap rack-
Structural Report and Calculations
31-60 ft.Roof Height
Table 1G:Rail Spans(in)for Roof Slopes and Tilt Angles 37'toW6063A11oyWind Load
Vult 110 Ifs 120 125 130 135 140 145 150 15580 1909n 17.9 193 212 23.1 249 269 289 31.0 332 35.411
7.8 53.3Pa P� -7.7 -0.4 +9.1 A.9I0.7 -11.6 I2A •141 -1520.6 -190 0 120 [it -A .16 1119 7410 8 110 109 108 10] 106 104 103 101 97 9l9 74
c 20 15 89 89 89 89 89 88 87 86 86 85 84 83 79 74
a 30 23 75 75 75 75 75 75 75 75 75 75 75 74 73 72
y 40 31 66 66 66 66 66 66 66 66 66 66 66 66 66 66
50 39 60 60 60 6D (A 60 60 60 60 60 60 60
v 60 46 55 55 55 55 55 55 55 55 35 55 53WL
70 54 51 11 51 51 51 51 51 51 51 51 51 80 62 48 48 48 48 48 48 48 48 48 48 4B 100 77 43 43 43 43 43 43 43 43 43 43 47 120 92 40 40 40 40 40 40 40 40 40 40 40
31-60 ft.Roof Height
Table 3H:RM(ln)for Roof Slopes and Tilt Angles 46'to j66063Aj11oyWind Load
Vull Ito 5 130 135 140 145 I50 15580 1909n 17.9 .1 249 26.9 289 31.0 332 35.4 .8 533Pa Pa -T3 S -102 -1L0 •11.9 -12.7 -13.69.6 dl90 0 120 6 113 1 76to 8 104 0 98 97 96 94 93 911 76
v j0 t5 88 8] 86 85 84 83 82 81 81 80 79 77 75 73
0
3 30 23 1 75 1 75 75 75 75 74 73 73 72 72 71 70 68 67
Nq0 3t 66 66 66 66 66 66 66 66 66 65 65 64 63 62
e 50 39 60 60 60 60 6D 60 6D 60 60 60 60 60 59 SB
0
v 6D 46 55 55 55 55 55 55 55 55 55 55 55 55 55 59
70 54 5t 51 51 51 51 51 sl 51 51 51 51 51 SI 51
80 62 48 48 48 48 48 48 48 48 1 48 48 48 48 48 48
too 77 43 43 47 43 43 4J 43 43 1 43 47 43 43 47 47
120 92 40 40 90 40 i0 {0 40 40 4D 40 10 40 40 90
NSSE, 5022 Sunrise Boulevard Fair Oaks CA 95629(916)536.9585 Rev.12/31M13 Page 9
I�
I.
(
Series 100 Snap race-
Structural Report and Calculations
0-30 ft.Roof Height
Table 2C:Rail Spans(in)for Roof Slopes and Tilt Angles 37'to 45' 6005Alloy
Wind Load
Vult 110 115 120 125 130 135 140 145 150 155 160 170 ISO 190
q6 15516.9 ISA 20.0 21.6 233 25.1 26.9 28.8 30.7 3L8 37.0 41.5 462
P4 P. .6.7 -73 .7.9 4.6 43 -10.0 .108 .11.6 -12.4 .13.2 -14.1 ASS -17.8 -19.9
�. 0 0 144 144 144 144 144 141 139 133 121 12 116 109 102 96
,5 10 B 134 133 132 130 129 128 127 I'3 124 122 116 109 102 96
0
20 15 106 106 106 106 106 106 106 105 105 104 103 101 100 96
> 30 23 90 90 90 90 90 90 90 9D 90 90 90 90 89 88
40 31 79 79 79 79 79 79 79 1 79 79 79 79 79 1 79 79
v 50 19 72 72 72 72 72 72 T 72 72 72 7' 72 72 r-
>? 60 -06 66 66 66 66 66Lfil
66 66 66 66 66 66 66
O 62 62 62 62 62 j62 62 62 62 62 62 62 62
70 5480 62 58 58 SB 58 58 58 58 58 58 58 56 58
100 77 52 5E 52 52 52 52 T_ 52 52 52 5E 5E12092 48 48 4848 48 48 48 48 48 48 48 46
0-30 JIL Roof Height
Table 2D:Rail Spans(in)for Roof Slopes and Tilt Angles 46'to 60' 6005 Allay
Wind Load
Vult 110 115 13125 130 135 140 145 150 155 160 170 180 19D
qh 155 16.9 .0 21.6 233 25.1 269 288 30.7 32.8 37.0 41.5 462
Pa P� .63 49 1 49 -9.6 -103 -11.0 -11.8 .12.6 -13A -151 -17.0 -18.9
G` 0 0 144 W 14E IJ9 135 132 IN 126 121 113 105 99
s 10 B 123 126 23 121 120 119 116 115 113 112 109 105 99
0 20 IS 106 106 04 103 102 101 100 99 98 97 95 93 91
g30 23 90 9D 0 90 90 9D 89 8B 88 87 85 84 82
40 31 79 79 9 79 79 79 79 79 79 79 78 777 76
50 39 72 72 2 72 72 72 72 72 72 12 72 72 71
e 60 46 66 66 6 66 66 66 66 66 66 66 66 66 66
0 62 62 2 62 62 62 62 62 62 61 62 62 62
70 54BO 62 58 58 6 58 5B 58 58 58 58 58 58 58 58
100 77 52 52 2 S2 52 52 52 52 52 52 52 52 52
120 92 48 48 8 48 4948 48 48 48 48 1 48 48 48
NSSE 5022 sunrise Boulevard Fair Oaks CA 95628(916)536-9585 Rev. 12131/2013 Page 11
Series 100 Snap rack..
Structural Report and Calculations
31-60 ft.Roof Height
Table 2G:Rail Spans(in)for Roof Slopes and Tilt Angles 37'to 45' 6005Alloy
Wind Load
Wit 110 113 1 120 125 130 135 140 145 130 155 160 170 1 190 190
96 179 195 121.2 23.1 24.9 26.9 289 31.0 332 35.4 37.8 426 47.8 533'
Pp Ps -7.7 -8.4
s I11.6
-II227A -I13L.3 -I14n.3
0 .
919
10 -i15n2 -I10632 -110831 -2904.6 -2829
9
8 132 I31 129 128 12] 13 124 122 117 112 103 101 94 99
c 20 15 106 IN IN106 106 105 103 t01 IN 102 101 99 94 89
a'
3 30 23 90 90 g0 90 90 90 90 90 90 90 90 69 37 86
h 40 31 79 ]9 74 79 79 79 79 79 79 ]9 79 79 79 79
c 50 39 rz n 72 72 72 72 r_ 7_ 72 1 72 n n 72 rz
O 60 96 66 66 66 66 66 66 66 65 66 66 56 66 66 66
70 54 62 62 62 62 62 62 62 62 62 62 62 b2 62 62
80 62 56 58 56 56 58 58 58 58 58 58 58 58 58 58
l09 77 32 52 52 52 52 5_ s2 52 52 52 s r_ sz sz
120 1 92 1 48 1 48 48 46 1 48 48 48 48 48 48 46 48 48 46
31-60 ft.Roof Height
Table 211:Rail Spans(in)for Roof Slopes and Tilt Angles 46'to 60' 6005A11oy
Wind Load
Vult 110 115 120 129 130 135 140 145 I50 I55 160 170 180 190
96 179 195 212 23.1 2A.9 26.9 28.9 31.0 332 35.9 77.8 42.6 47.8 532
P6 P1 -7.3 -U 4L7 AS -102 -11.0 -11.9 -I27 •13.6 .145 .15.5 -175 •19.6 .21.8
L. 0 0 144 149 lil 179 Il6 132 129 IIS 111 104 I 97 91
$ 10 8 125 123 I72 Ix0 118 116 115 I13 111 Il0 103 104 97 91
S20 15 105 104 10J 102 101 100 99 98 97 96 95 92 90 88
30 23 90 90 90 90 90 89 89 1 87 87 86 85 83 82 80
h 40 31 79 79 79 79 79 79 79 1 79 79 79 78 77 76 74
c 50 39 72 72 7272 rz 72 72 72 72 72 72 71 70 a
60 46 66 66 66 66 66 66 66 66 66 66 66 66 65
62 62 62 62 62 62 62 62 62 62 62 62 62 1
80 62 56 58 58 58 38 53 56 58 58 58 58 58 58 58
100 77 52 52 52 52 521 52 52 52 52 T_ 1 52 52 52 52
120 92 98 48 48 49 48 1 48 48 -- 48 q8 48 4B 46 46
1VSSE 5022 Sunrise Roulevatd Fav Oala CA 95628(916)536-9585 Ray. 17012013 Page 13
Series 100 Snap rack-
Structural Report and Calculations
Summary Charts and Topographic Factors
The attached pages of this summary contain some of the most common building
configurations with varying wind speeds. These charts serve as quick references for
looking up maximum rail spans based on the building and site conditions. However, it
must be noted that for any building where a topographic factor is applied (e.g. bills,
mesas,seashore),the rail span lengths given might exceed what is allowed for the given
site condition. Jr. that case, a registered structural engineer shall evaluate the exact
topographic conditions for the specific site.
End Zone and Edge Distances
The edge zones and/or end zones of the roof area shall be determined based on the
building's least horizontal dimension(LDH). The edge zone,"a", is equal to 10%of the
LDH where a= .1 * LDH. It should be noted that if the solar panels installed cross two
different roof sections,the smaller LDH shall be used.
Rail spans in the comer zone shall be a maximum of 24 inches and this restriction will
only apply to the rail attachments located in the end and edge zones (does not apply to
modulus or rails that overhang into the zone). Furthermore, all edge zones requiring an
adjustment (shaded cells in chart) shall be reduced by 24 inches to a minimum of 32
inches.
1�wrxrooar:
O Y `�
"J
G
J I
G
O L
LCORNER%ONE
'a
Detail 1 roof end/ed a and corner zones
NSSE 5022 Sunrise Boulevard Fair Oaks CA 95629(916)536-9585 Rev. 1 213 120 1 3 Page 15
LEGEND AND ABBREVIATIONS TABLE OF CONTENTS
SCOPE OF WORK GENERAL NOTES EPAGE DESCRIPTION
• SYSTEM SIZE:330OW DC, 3000W AC • ALL WORK SHALL COMPLY WITH 2O13 CEC,2013 CBC, MUNICIPAL CODE,AND SE SERVICE ENTRANCE SOLAR MODULES COVER SHEET
• MODULES: (12) REC SOLAR: REC275TP ALL MANUFACTURERS' LISTINGS AND INSTALLATION INSTRUCTIONS. RAIL SITE PLAN
INVERTER(S): • PHOTOVOLTAIC SYSTEM WILL COMPLY WITH 2O13 CEC. LAYOUT
(1)SOLAREDGE TECHNOLOGIES: SE3000 (240V)W/-ER-US . ELECTRICAL SYSTEM GROUNDING WILL COMPLY WITH 2O13 CEC. MP MAIN PANEL
OR A-US • PHOTOVOLTAIC SYSTEM IS UNGROUNDED. NO CONDUCTORS ARE SOLIDLY PV4.0 ELECTRICAL
• RACKING: SNAPNRACK SERIES 100 UL; FLAT TILE ROOF GROUNDED IN THE INVERTER. SYSTEM COMPLIES WITH 690.35. PV4.1 ELECTRICAL CALCS Or
HOOK. SEE PEN D13. • MODULES CONFORM TO AND ARE LISTED UNDER UL 1703. SP SUB-PANEL STANDOFFS&
INVERTER CONFORMS TO AND IS LISTED UNDER ILL 1741. FOOTINGS PV-5.0 SIGNAGE
• RACKING CONFORMS TO AND IS LISTED UNDER UL 2703.
• CONSTRUCTION FOREMAN TO PLACE CONDUIT RUN PER 690.31 O AND 2012
LC PV LOAD CENTER ,�,� CHIMNEY
I FC 605.11.2.
• ARRAY DC CONDUCTORS ARE SIZED FOR DERATED CURRENT. ATTIC VENT
• 9.4 AMPS MODULE SHORT CIRCUIT CURRENT. SM SUNRUN METER
14.68 AMPS DERATED SHORT CIRCUIT CURRENT(690.8(a)&690.8(b)).
FLUSH ATTIC VENT
ADDITIONAL ELECTRICAL NOTES: pM DEDICATED PV METER
• THIS PROJECT SHALL COMPLY WITH THE 2013 CALIFORNIA BUILDING CODE, I PVC PIPE VENT
WHICH ADOPTS THE 2012 IBC,2012 UMC. 2012 UPC AND THE 2011 NEC.AND INVERTER(S)WITH City of Menifee
WORKING SPACES PER UMC 305 AND NEC 110.26. INV INTEGRATED DC METAL PIPE VENT Building & Safety Dept.
• THIS SYSTEM WILL NOT BE INTERCONNECTED UNTIL APPROVAL FROM THE DISCONNECT AND AFCI — T-VENT 0
LOCAL JURISDICTION AND THE UTILITY IS OBTAINED. JUL 01 2016
• THIS SYSTEM IS AN UTILITY INTERACTIVE SYSTEM WITH NO STORAGE AC AC DISCONNECT(S)
BATTERIES. O T SATELLITE DISH
• THE SOLAR PHOTOVOLTAIC INSTALLATION SHALL NOT OBSTRUCT ANY
Received
PLUMBING, MECHANICAL, OR BUILDING ROOF VENTS. DC DC DISCONNECT(S) � FIRE SETBACKS �
• A LADDER SHALL BE SECURED IN PLACE FOR INSPECTION IN COMPLIANCE EE
WITH CAL-OSHA REGULATIONS.
• PROPER ACCESS AND WORKING CLEARANCE WILL BE PROVIDED PER COMBINER BOX HARDSCAPE
B
SECTION 110.26 CEC. -o-
• EXPOSED NON-CURRENT CARRYING METAL PARTS OF MODULE FRAMES, PL— PROPERTY LINE
EQUIPMENT,AND CONDUCTOR ENCLOSURES SHALL BE GROUNDED IN -I INTERIOR EQUIPMENT —
ACCORDANCE WITH 250.134 OR 250.136(A) REGARDLESS OF VOLTAGE.. L J SHOWN AS DASHED SCALE: NTS Sunrum
• EACH MODULE SHALL BE GROUNDED USING THE SUPPLIED CONNECTION
C
POINT IDENTIFIED ON THE MODULE AND THE MANUFACTURER A AMPERE
INSTRUCTIONS. AC ALTERNATING CURRENT �:� �`� 00
• IF THE EXISTING GROUNDED ELECTRODE SYSTEM CAN NOT BE VERIFIED AFCI ARC FAULT CIRCUIT INTERRUPTER GILBERT CORREIA.CIO,C46
OR IS ONLY METALLIC WATER PIPING, IT IS THE CONTRACTOR AZIM AZIMUTH CA CL#750184
VICINITY MAP RESPONSIBILITY TO INSTALL A SUPPLEMENTAL GROUNDING ELECTRODE. COMP COMPOSITION 295 TRADE ST.SAN MARCO5.CA 92078
• MODULE INTERCONNECTIONS WILL BE MADE WITH 10 AWG PV RHW/USE-2 DC DIRECT CURRENT PHONE 858.2 1.9079
FAX BSB.550.9506
WIRE. (E) EXISTING
ARRAY CONDUCTORS ARE SIZED FOR DERATED CURRENT PER STRING. EXT EXTERIOR CUSTOMER RESIDENCE:
• INVERTER PROVIDES NECESSARY GROUND FAULT PROTECTION AS FIRM FRAMING RICK WRIGHT
�. REQUIRED BY 2011 NEC 690.5 GROUND FAULT PROTECTION. INT INTERIOR 27958 BLACKHAWK RD,
PHOTOVOLTAIC SYSTEM HAS CONDUCTOR BONDED TO GROUND IN LBW LOAD BEARING WALL MENIFEE,CA,92585
27958 BLTckhawk Rd INVERTER AS REQUIRED BY 2011 NEC 690.41 SYSTEM GROUNDING, AND MAG MAGNETIC
°[+grya Rd alaCkhawk Rd 690.42 POINT OF SYSTEM GROUNDING CONNECTION. MSP MAIN SERVICE PANEL TEL.(951)238-8962 APN#:33648M
d • USE UL APPROVED BONDING FITTINGS AT ALL CONDUIT/BOX JUNCTIONS.
n (N) NEW PROJECT NUMBER:
Moore Prt7 wng • MODULES CONFORM TO AND ARE LISTED UNDER UL 1703 AND INVERTER NTS NOT TO SCALE
CONFORMS TO AND IS LISTED UNDER UL 1741. OC ON CENTER 124R-958WRIG
i • THE PV CONNECTION IN THE PANEL BOARD SHALL BE POSITIONED AT THE PRE-FAB PRE-FABRICATED 949.7 5.39
C Tate Rd Tate Rd DESIGNER:
OPPOSITE(LOAD)END FROM THE INPUT FEEDER LOCATION OR MAIN PSF POUNDS PER SQUARE FOOT
CIRCUIT LOCATION AS REQUIRED BY NEC 690.64(B)(7). PV PHOTOVOLTAIC ELLIOT WENZEL
D1s6ounm Prmt Censer
TL TRANSFORMERLESS DRAFTER:
Vvhitnnpttm Rd . ALL CONDUITS, BOXES, JUNCTION BOXES AND DISCONNECTS SHALL BE TYP TYPICAL R-BIEL
PAINTED TO MATCH THE EXISTING BACKGROUND COLOR OF ITS LOCATION. V VOLTS
NO VENTS(DORMER, PLUMBING, MECHANICAL)TO BE COVERED OR ROUTED W WATTS SHEET
m AROUND SOLAR MODULES. REV NAME DATE COMMENTS COVER SHEET
r. g A
r REV:A 6/29/2016
PAGE PV-1 .0
ipmwr 1 tr 0 2AI
PITCH TRUE MAG PV AREA
AZIM AZIM (SOFT)
SITE PLAN -SCALE= 1/16"=1'-0"
AR-01 22° 232° 220° 124.2
® PL PL PL
AR-02 220 520 40° 88.7
Qy
V
Qy
V
OINV
e
(E) FENCE . . . .
(E)RESIDENCE
y t ,
MP (N)ARRAY AR-02
•SM 0 SE sunfun„
O FIRE SETBACKS
(3'TYP)
GILBERT CORREIA,C10.C46
Q CA CL#750184
(E)DRIVEWAY 29S TRADE ST.SAN OARCOS.CA 92078
F CNE85838tWM
Q FAX 858.550.9586
m CUSTOMER RESIDENCE:
v P v e RICK WRIGHT
v
27958 BLACKHAWK RD,
D
v
\ (N)CONDUIT RUN MENIFEE, CA,92585
D (ON ROOF) TEL.(951)23"962 APN#:336480018
PROJECT NUMBER:
PL 124R-958WRIG
O
�Sy PL DESIGNER: eas.�os.39sa
ELLIOT WENZEL
O
PL DRAFTER:
1
PL R-BIEL PL SHEET
(N)ARRAY AR-01 (E)FENCE SITE PLAN
REV:A 6/29/2016
PAGE PV-2.0
ROOF TYPE ATTACHMENT ROOF HEIGHT ROOF FRAME FRAME TYPE FRAME MAX FRAME OC ROOF EDGE MAX RAIL MAX RAIL DESIGN CRITERIA
EXPOSURE MATERIAL SIZE SPAN SPACING ZONE SPAN OVERHANG MODULES:
AR-01 CONCRETE TILE[FLAT] FLAT TILE ROOF HOOK. SEE PEN D13. TWO STORY ATTIC WOOD PREFABRICATED TRUSS 2 X 4 5'-0" 24" 4'-0" 6'-0" 2'-0" ROC SOLAR: REC275TP
MODULE DIMS:
AR-02 CONCRETE TILE[FLAT] FLAT TILE ROOF HOOK. SEE PEN D13. TWO STORY ATTIC WOOD PREFABRICATED TRUSS 2 X 4 5'-0" 24" 4'-0" 6' -0" 2'-0" 65.5"x 39"x 1.5"
MODULE CLAMPS:
D1 -AR-01 -SCALE: 3116"=V-0" Portrait: 8.2"- 16.4"
PITCH: 22' { 7'-7" 16'-5" 3'— Landscape:4.9"-9.8"
AZIM:232° I MAX DISTRIBUTED LOAD: 3 PSF
® 01 (D I SNOW LOAD: 0 PSF
3' WIND SPEED:
110 MPH 3-SEC GUST.
LAG SCREWS:
5/16"x3.5":2.5"MIN EMBEDMENT
NOTE:
6'TYP 6" INSTALLERS TO VERIFY RAFTER
SIZE, SPACING AND SLOPED
_E)— I SPANS,AND NOTIFY E.O.R.OF
ANY DISCREPANCIES BEFORE
°
PROCEEDING.
5'-6„
C5 No. 7 T
W
sip 70 IO *
:t
L"111L �
s u n ru n
D2 -AR-02-SCALE: 3/16"= V-0"
PITCH- 22° —3'— 16'-5" 23'-11" GILBERT CORRELk C10,C46
AZIM: 52° CA CL#750184
® .I ass sPN nwlcos,u,9x1e
PHONENE 85 050,28.381.90i9
3 FAX058.550.9566
CUSTOMER RESIDENCE:
C� I RICK WRIGHT
27958 BLACKHAWK RD.
5'-6" I-6'TYP-1 � MENIFEE,CA,92585
— TEL.(951)23B-8962 A N#:336480018
PROJECT NUMBER:
124R-958WRIG
DESIGNER: 94 9.705.39 53
ELLIOT WENZEL
DRAFTER:
R-BIEL
SHEET
LAYOUT
r
6/29/2016
PAGE .0PV-3
120/240 VAC
SINGLE PHASE
SERVICE
OMETER#:
M SCE 2220„-B,9545
UTILITY
GRID EXISTING 200A
C 1 MAIN BREAKER
(NOT CENTER FED)
1
EXISTING SOLAREDGE
225A TECHNOLOGIES:SE3000
MAIN (N)LOCKABLE (N)SUN RUN (N)LOCKABLE (240V)W/-ER-US OR A-US
�� PANEL BLADE TYPE CENTRON 4G BLADE TYPE
3000 WATT INVERTER 2 JUNCTION BOX PV MODULES
FACILITY AC DISCONNECT METER AC DISCONNECT OR EQUIVALENT
LOADS REC SOLAR: REC275TP
/-3 f-3 F3 /-3 _ / (12)MODULES
+(�j/� OPTIMIZERS WIRED IN (1)SERIES OF
t (12)OPTIMIZERS
20A PV SQUARE D 250V METER SQUARE D
LOAD RATED DC SOLAREDGE POWER OPTIMIZER
BREAKER AT DU221RB SOCKET DU221RB
OPPOSITE END 3R,30A,2P 125A CONTINUOUS 3R, 30A,2P DISCONNECT&AFCI P300
OF BUSBAR 120/240VAC & 120/240VAC
240V METER
200A, FORM 2S
CONDUIT SCHEDULE IF THE MAIN SERVICE PANEL HAS THE MAIN BREAKER LOCATED IN THE MIDDLE OF THE BUSS
BAR,THEN THE MAXIMUM COMBINED OVERCURRENT DEVICES ALLOWED IS 100 PERCENT OF
# CONDUIT CONDUCTOR NEUTRAL GROUND THE BUSS BAR RATING. s u n ru n
1 NONE (2) 10 AWG PV WIRE NONE (1)6 AWG BARE COPPER DO NOT INSTALL INVERTER WHERE IT COULD BE EXPOSED TO DIRECT SUNLIGHT _
2 3/4" EMT OR EQUIV. (2) 10 AWG THHN/fHWN-2 NONE (1)8 AWG THHN/THWN-2 O
3 3/4" EMT OR EQUIV. (2)10 AWG THHN/THWN-2 (1) 10 AWG THHN/THWN-2 (1)8 AWG THHN/THWN-2 PROVIDE INVERTER SHADING REQUIREMENTS
GILBERT CORREIA,G10,C46
INSTALLER TO PROVIDE A NEW 3/4"DIAMETER X 10'-0" LONG GROUND ROD WITH MINIMUM CA CL#750184
8'0" EMBEDMENT IF EXISTING BUILDING ELECTRODE SYSTEM IS NOT ACCESSIBLE.
295 TRADE ST.SAN MARGOS,CA 82878
FAX N .S L95688i9
FAX 058.558.9566
MODULE CHARACTERISTICS CUSTOMER RESIDENCE:
OPTIMIZER CHARACTERISTICS G12AWGBARE SS SPLIT
COPPER WIRE SS SPLIT LOCK WASHER RICK WRIGHT
REC SOLAR: REC275TP 275 W MIN INPUT VOLTAGE 8 VDC tSSBONDING
(TORQUE TO16FT-LBS) 27958 BLACKHAWK RD,
/ CK MENIFEE, CA,92585
OPEN CIRCUIT VOLTAGE 38.8 V MAX INPUT VOLTAGE 48 VDC GROSNA N D LUGROUNDLUG TEL.(951)23&8962 APN#:336480018
MAX POWER VOLTAGE 31.4 V MAX INPUT ISC 10 ADCl / BONDINGPROJECT NUMBER:
SHORT CIRCUIT CURRENT 9.4 A MAX OUTPUT CURRENT 15 ADC \ CHANNELNUT 124R-958WRIG
SYSTEM CHARACTERISTICS-INVERTER 1DESIGNER: 949.705.3953
RAIL ELLIOT WENZEL
PINS
SYSTEM SIZE 3300 W NOTE:
. ALL HARDWARE IS INCLUDED FROM MANUFACTURER DRAFTER:
SYSTEM OPEN CIRCUIT VOLTAGE 12V . A MINIMUM OF ONE GROUND LUG IS TO BE INSTALLED ON EVERY R-BIEL
CONTINUOUS ROW OF MODULES
SYSTEM OPERATING VOLTAGE 350 V . GROUNDING LUG MAY BE INSTALLED IN EITHER RAIL CHANNEL
MAX ALLOWABLE DC VOLTAGE 500 V . GROUNDING LUG MAY BE INSTALLED SO GROUND WIRE IS PARALLEL SHEET
OR PERPENDICULAR TO RAIL ELECTRICAL
ENSURE SPLIT LOCK WASHER IS INSTALLED ON TOP OF COPPER WIRE
SYSTEM OPERATING CURRENT 9.4 A
SNAPNRACK GROUNDING SCALE:NTS REV:A 6/29/2016
SYSTEM SHORT CIRCUIT CURRENT 15 A
PER CODE:690.52
PAGE PV-4.0
System Information
3.3 kW DC Photovoltaic System
(12)REC Solar: REC275TP,SolarEdge Technologies:SE3000(240V)w/-ER-US or A-US
Allowable Backfeed
Allowable Back-feed= (Main Panel Rating)x 1.2-(Main Breaker Rating)_
225A x 1.2- 200A=70A
20A<_70A 4 Interconnection meets 705.12(D)(2) requirements.
DC Wire Sizing
Max Circuit Current=(Optimizer Max Power)x(Continuous Load)(690011)(1)]_
1SA x 1.25= 18.75A
Adjusted Conductor Ampacity=(High Temp)ITable 310.161 x(Conduit Fill)]Table 310.15(6)(2)(a)] x(Conductor Ampacity)(Table 310.16' _
0.76 x 1 x 40A=30.4A
Terminal Ratingl110.14(q] =
10 AWG,60°C Rated= 30A
30A< 30.4A 4 Terminal rating governs conductor sizing.
18.75A<30A-> lO AWG Ampacity OK
Therefore 10 AWG is sufficient.
AC Wire Sizing
Max AC Output Current= (Max Inverter Output)x(Continuous Load)1210.19(A)(1)]
12.5 A x 1.25= 15.63 A
Adjusted Conductor Ampacity= (HighTemp)]Tabie 310.161 x(Conduit Fill)ITabie 310.15(e)(2)(01 x(Conductor Ampaeity)]Tab1e 310.16'_ s u n ru
1 x 1 x 40A=40A / ® -
Terminal Ratingl110.14iq]
10 AWG,60'C Rated= 30A GILBERT CORREIA.C70,C46
30A<40A--) Terminal rating governs conductor sizing. CA CL#750184
15,63A<30A 4 10 AWG Ampacity OK n5 TRADE ST.souMOROOS.0 92078
PHONE e58.281.9079
Therefore 10 AWG is sufficient. FM 85B 550.9566
CUSTOMER RESIDENCE:
Inverter Overcurrent Protection RICK WRIGHT
(Inverter Max Current)x(Continuous Load)= 27958 BLACKHAWK RD,
MENIFEE, CA,92585
12.5 A x 1.25=15.63 A 4 20 A Overcurrent Protection
TEL(951)23841962 APN k.336480018
System Characteristics PROJECT NUMBER:
VMa =Inverter Fixed String Voltage= 124R-958WRIG
350V I DESIGNER: 949.705.3953
Voc = Max Inverter System Voltage = ELLIOT WENZEL
500V I
DRAFTER:
Operating Current =(DC System Size)/350V= R-BIEL
330OW/350V =9.43 A
SHEET
Short Circuit Current= (Optimizer Max Current)x(#Strings)
ELECTRICAL CALCS
15Ax1= 15A
REV:A 6/29/2016
PAGE PV-4.1
A WARNING ' oil
ELECTRIC SHOCK HAZARD
THE DC CONDUCTORS OF THIS
PHOTOVOLTAIC SYSTEM ARE UNGROUNDED
AND MAY BE ENERGIZED LABEL LOCATION:
AC DISCONNECT,POINT OF INTERCONNECTION
LABEL LOCATION: (PER CODE:CEC690.54)
DC DISCONNECT,INVERTER
(PER CODE:CEC 690.35(F)) WARNING
[To be used when inverter is ungrounded) INVERTER OUTPUT CONNECTION • NOT
A WARNING RELOCATE
LABEL LOCATION:
ELECTRIC SHOCK HAZARD POINT OF INTERCONNECTION
DO NOT TOUCH TERMINALS (PER CODE:CEC 705.12(D)(7))
TERMINALS ON BOTH LINE AND [Not required if panelboard is rated not less than sum of ampere ratings
LOAD SIDES MAY BE ENERGIZED of all overcurrenl devices supplying it)
IN THE OPEN POSITION
DC VOLTAGE IS ALWAYS PRESENT CAUTION : SOLAR CIRCUIT
WHEN SOLAR MODULES ARE
EXPOSED TO SUNLIGHT LABEL LOCATION:
LABEL LOCATION: MARKINGS PLACED ON ALL INTERIOR AND EXTERIOR DC CONDUIT,RACEWAYS,ENCLOSURES,
AC DISCONNECT,POINT OF INTERCONNECTION AND CABLE ASSEMBLIES AT LEAST EVERY 10 FT,AT TURNS AND ABOVEIBELOW PENETRATIONS
(PER CODE:CEC 690.17(E)) AND ALL COMBINERMUCTION BOXES. (PER CODE:IFC605.11.1A)
A WARNING SOLAR •
ELECTRIC SHOCK HAZARD LABEL LOCATION: ■
DO NOT TOUCH TERMINALS DISCONNECT,POINT OF INTERCONNECTION
TERMINALS ON BOTH LINE AND (PER CODE:CEC690.13(e)) -
LOAD SIDES MAY BE ENERGIZED CAUTION
A WARNING DUAL POWER SOURCE ■
IN THE OPEN POSITION
LABEL LOCATION: SECOND SOURCE IS PHOTOVOLTAIC SYSTEM POWER TO THIS BUILDING IS
AC DISCONNECT,POINT OF INTERCONNECTION n
PER CODE:CEC 690.17(E),CB LABEL LOCATION: 1�
run
POI O INTERCONNECTIONWARNING-Electric Shock Hazard ALSO SUPPLIED FROM THE --
(PERR CODE:DE:CEC 705.12(D)(4))
CAUTION: SOLAR ELECTRIC 1'0 �
No user serviceable parts inside 1W senrice provider for assistanceSYSTEM CONNECTED FOLLOWING SOURCES WITH GILBERT CORREIA.C10,G6
CA CL#750184
LABEL LOCATION:authorized LABEL LOCATION: DISCONNECTS AS SHOWN
INVERTER,JUNCTION BOXES(ROOF),AC DISCONNECT WEATHER RESISTANT MATERIAL,DURABLE ADHESIVE,
295 TRI,pE BT.eAN MAftG0.S.CA 920T8
(PER CODE:CEC690.13.G.3&CEC 690.13.G.4) UL969 AS STANDARD TO WEATHER RATING(UL LISTING PHONE 858281.9W9
OF MARKINGS NOT REQUIRED),MIN%'LETTER HEIGHT FAa 85e.550,9566
WARNING: • • • ARIAL OR SIMILAR FONT NON-BOLD,PLACED WITHIN 11
POWER SOURCE THE MAIN SERVICE DISCONNECT,PLACED ON THE SOLAR PANELS CUSTOMER RESIDENCE:
OUTSIDE OF THE COVER WHEN DISCONNECT IS A,
ON ROOF RICK WRIGHT
LABEL LOCATION: OPERABLE WITH SERVICE PANEL CLOSED.
CONDUIT,COMBINER BOX (PER CODE:CEC690.15,690.13(B)) 27958 BLACKHAWK RD,
(PER CODE:CEC690.31(G)(3)(4)&CEC 690.13(G)(4) MENIFEE, CA, 92585
INVERTER i
TEL.(951)238-8962 APN#:33648D01B
RATED MAXIMUM POWER- 9 4 PROJECT NUMBER:
POINT CURRENT (Imp) 124R-958WRIG
RATED MAXIMUM POWER-
POINT VOLTAGE (Vmp) 350 DESIGNER: 949,705.3953
MAXIMUM SYSTEM
sooVOLTAGE (VOC) SERVICE ENTRANCE ELLIOT WENZEL
MAXIMUM CIRCUIT
CURRENT (Isc) is INVERTER LOCATIOlr= A4
AND PV BREAKER DRAFTER:
AC DISCONNEDISCONNECT R-BIEL
LABEL LOCATION: SHEET
(DC PER CODE:CEC INVERTER SUNRUN ME DISCONNECT SIGNAGE
(PER CODE:CEC690.53)
ADHESIVE FASTENED SIGNS:
•THE LABEL SHALL BE SUITABLE FOR THE ENVIRONMENT WHERE IT IS INSTALLED. REV:A 612912 116
•WHERE REQUIRED ELSEWHERE IN THIS CODE,ALL FIELD APPLIED LABELS,WARNINGS,AND 27958 BLACKHAWK RD, MENIFEE, CA, 92585
MARKINGS SHOULD COMPLY WITH ANSI Z535.4[NEC 110.21(8)FIELD MARKING].
•ADHESIVE FASTENED SIGNS MAY BE ACCEPTABLE IF PROPERLY ADHERED.VINYL SIGNS SHALL PAGE PV-5.0
BE WEATHER RESISTANT(IFC 605.11.1.31