PMT16-00393 City of Menifee Permit No.: PMT16-00395
29714 HAUN RD. Type: Pool/Spa-Residential
ACCEL/-> MENIFEE,CA 92586
MENIFEE Date Issued: 0 211 6/2 01 6
PERMIT
Site Address: 30547 BUCKBOARD LN,MENIFEE, CA Parcel Number: 358-451-006
92585 Construction Cost: $25,000.00
Existing Use: Proposed Use:
Description of INGROUND POOL AND SPA WTH 160'GAS LINE FOR POOL EQUIPMENT AND 39 GAS LINE FOR
Work: FUTURE BBQ&FIRE PIT
Owner Contractor
RYAN RUSHING ALOHA POOL&DESIGN
30547 BUCKBOARD LANE 41083 SANDALWOOD CIRCLE STE I
MENIFEE, CA 92585 MURRIETA, CA 92562
Applicant Phone: 9514539728
MARK KLINGSPORN License Number:965927
ALOHA POOL&DESIGN
41083 SANDALWOOD CIRCLE STE I
MURRIETA,CA 92562
Fee Description Qtv Amount($
Swimming Pool/In-Ground Spa 1 467.00
Plumbing Fixtures and Vents,fixtures 1 116.00
Building Permit Issuance 1 27.00
GREEN FEE 1 1.00
SMIP RESIDENTIAL 1 4.00
General Plan Maintenance Fee-Electrical 1 23.35
$638.35
The issuance of this permit shall not prevent the building official from thereafter requiring the correction of errors in the plans and
specifications or from preventing builiding operations being carried on thereunder when in violation of the Building Code or of any other
ordinance of City of Menifee.Except as otherwise stated,a permit for construction under which no work is commenced within six
months after issuance,or where the work commenced is suspended or abandoned for six months,shall expire,and fees paid shall be
forfeited.
AA_BIdg_Parmt_Template.rpt Page 1 of 1
CITY OF MENIFEE
LICENSED DECLARATION property who builds or improves thereon,and who contracts for the projects
with a licensed contractor(s)pursuant to the Contractors State License Law).
I hereby affirm under penalty of perjury that 1 am under provisions of
Chapter9(commencing with section 7000)o ivision 3 of the Business and ❑I am exempt from licensure under the Contractor's State License Law for
Professions Code and my license is in full fortt and effect, the following reason:
License(lass c=-%7� Liceme No. By my signature below I acknowledge that,except for my personal residence
Expires 149 11 Signature in which I must have resided for at least one year prior to completion of
improvements covered by this permit.I cannot legally sell a structure that I
WORKER'S COMPENSATION DECIARA N have built as an owner-builder if it has not been constructed in its entirety by
❑I hereby affirm under penalty of perjury one of the following declarations:I licensed contractors.I understand that a copy of the applicable law,Section
have and will maintain a certificate of consent of self-insure for worker's 7044 of the Business and Professions Code,is available upon request when
compensation,issued by the Director of Industrial Relations as provided for this application is submitted or at the following website:
by Section 3700 of the Labor Code,For the performance of work for which
this permit is issued. www.leeinfo.ca.eov/calaw.html.
Policy# Date
❑I have and will maintain workers compensation insurance,as required by PROPERTY OWNER OR AUTHORIZED AGENT
section 3700 of the Labor Code,for the performance of the work for which �y my signature below l certify to each of the following:I am the property
this permit is issued.My workers compensation insurance carrier and policy _4er or iuthorized to act on the property owners behalf.I have read this
number are: applicatic i and the information I have provided is correct I agree to comply
Carrier with all a Iicable city and county ordinances and state laws relating to
building c nstruction.I authorize representatives of this city or county to
Policy# Expires enter ove identified ro (poses.
(This section need not to be completed is the permit is for me-hundred Date
dollars($100)or less PROP WNER OR AUTHORIZED AGENT
rtify that int performance of the work for which this permit is issued,
shall not emolov y persons in any manner so as to become subject to the CITY BU NESS LICENSE#
workers compens ion laws of California,and agree that if I should become HAZARDOUS MATERIAL DECLARATION
subject to the worl Ws compensation prov' ' ion 3700 of the Labor
Cade,I shall h th com I ose provisions. Will the applicant or future building occupant handle hazardous material or a
Applicant Date mixture containing a hazardous material equal to or greater thatthe
amounts specified on the Hazardous Materials Information Guide?
WARNING:FAA E TO SECURE WORKER'S COMPENSATION COVERAGE IS Dyes
UNLAWFUL,AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES Will the int nded use of the building bythe applicant or future building
AND CNIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS($100,00(1),IN occupant require a permit for the construction or modification from South
ADDITION TO THE COST OF COMPENSATION,DAMAGES AS PROVIDED FOR Coast Air duality Management DisMct(SCAQMD)?See permitting checklist
IN SECTION 3706 OF THE LABOR CODE,INTEREST,AND ATTORNEYS FEES forguidVines
CONSTRUCTION LENDING AGENCY ❑Yes 10
1 hereby affirm that under the penalty of perjury there is a construction Will the proposed building or modified facility be within 1000 feet of the
lending agency for the performance of the work which this permit is Issued outer boundary of a school?
(Section 3097 Civil Code) ❑Yes 1. 0
OWNER BUILDER DECLARATIONS I have rea/d the Hazardous Material Information Guide and the SCAQMD
I hereby affirm under penalty of perjury that am exempt from the permitting checklist.I understand my requirements under the State of
Contractors License Law for the reason(s)indicted below by the California Health&Safety Code,Section 25505 and 25534 concerning
checkmark(s)I have placed next to the applicable item(s)(Section 7031.5 Dyzard°�s�aterial reporting.
Business and Professions Code).Any city or county that requires a permit to es �o
Dale
construct,alter,im prove,demolish or repair any structure,prior to its PROPERTY OWNER OR AUTHORIZED AGENT
issuance,also requires the applicant for the permit to file a signed statement
that he or she is licensed pursuant to the provisions of the Contractors State EPA RENOVATION,REPAIR AND PAINTING IRRP)
License Law(Chapter 9(commencing with Section 7000)of Division 3 of the The EPA Renovation,Repair and Painting(RRP)Rule requires contractors
Business and Professions Code)or that he or she is exempt from licensure receiving compensation for most work that disturbs paint in a pre-1978
and the basis for the alleged exemption.Any violation of Section 7031.5 by residence or childcare facility to be RRP-certified firms and comply with
an Applicant for a permit subjects the applicant to a civil penalty of not more required practices.This includes rental property owners and property
than($500). managers who do the paint-disturbing work themselves or through their
❑I,as owner of the property,or my employee with wages as their sole employees.For more information about EPA's Renovation Program visit:
compensation,will do( )all of or( )portion of the work,and the structure is www.eoa.aov/lead or contact the National Lead Information Center at
not intended or offered for sale.(Section 7044,Business and Professions 1-800-424-LEAD(5323).
Code;The Contractors State License Law does not apply to an owner of a ❑An EPA Lead-Safe Certified Renovator will be responsible for this project
property who,through employees'or personal effort,builds or improves the
property provided that the improvements are not intended or offered for Certified Firm Name:
sale.If,however,the building or improvement is sold within one year of Firm Certification No.:
completion,the Owner-Builder will have the burden of provingthat itwas
not built or improved for the purpose of sale. ❑No EPA Lead-Safe Certified Finn is required for this project because:
❑I,as owner of the property am exclusively contracting with licensed
contractors to construct the project(Section 7044,Business and Professions
Code:The Contractors State License Law does not apply to an owner of a
If your project does not comply with EPA RRP rule please fill out the RRP
Acknowledgement.
: ;..`
Menifee
DATE Z t PERMIT/PLAN CHECK NUMBER S
TYPE: O COMMERCIAL O RESIDENTIAL O MULTI-FAMILY O MOBILE HOME X POOL/SPA O SIGN
SUBTYPE: O ADDITION O ALTERATION O DEMOLITION O ELECTRICAL 9tlN&41§104tety Dept.
O NEW O PLUMBING O RE-ROOF-NUMBER/�OFSQUARES
FEB 1
2016
DESCRIPTION OF WORK - L, ( t°T 6
PROJECTADDRESSaa-
ASSESSOR'S PARCEL NUMBER � ��-{61 �((,(�[y LOT TRACT
OWNER NAME (2-0- t'+' j
ADDRESS
PHONE EMAIL
APPLICANT NAME 5Y'
ADDRESS
PHONE EMAIL
n
CONTRACTOR'S NAME �.� ` OWNER BUIL�DEER? O YES
BUSINESS NAME 1 � Ur V -e--. p CC a- 5J'�
ADDRESS ZQ
PHONE [ ��—�� �U EMAIL
CONTRACTOR'S STATE LIC NUMBER 65 77 7/ [ LICENSE CLASSIFICATION
VALUATION$ Z5708P SO,FT p L SO FT
APPLICANT'S SIGNATURE ATE
DEPARTMENT DISTRIBUTION 1 CITY OF MENIFEE BUSINESS LICENSE NUMBER
BUILDING PLANNING ENGINEERING FIRE GREEN 1 SMIP Lf
INVOICE �//�� PAIDAMOUNT /I�
AMOUNT L0 • �p% O CASH 6 CHECK# O CREDIT CARD VISA/MC
PLAN CHECK FEES PAID AMOUNT OCASH 0CHECK# 0CREDIT CARD VISA/MC
OWNER BUILDER VERIFIED O YES O NO DL NUMBER NOTARIZED LETTER 0-YES O NO
City of Menifee Building&Safety Department 29714 Houn Rd. Menifee, CA 92586 951-672-5777
www.cityofinenifee.us Inspection Request Line 951-246-6213
s�^4t'
b mac,
A
i
v
�u Syr � '( ' ✓ � \
+ t7&t� Jt2 P� L�
s � utu�ur.at.mtwrcw�ee�on.com (M�p��,=� �iZS$``l
i ' 1t0ia SawNAwN Or. P
(x tt owrbtiN Go.gnu
1 OS1-4534VF= 61c9i839i7
#ii# 334
{
f
i
t ji(
i
i f
t �
9 j
�� i
City of Menifee Permit No.: PMT16-00393
29714 HAUN RD.
�A►CCELA7. MENIFEE,CA 92586 Type: Pool/Spa-Residential
MENIFEE Date Issued: 0 2/1 612 01 6
PERMIT
Site Address: 27865 BARONI RD, MENIFEE,CA 92585 Parcel Number: 329-050-042
Construction Cost: $30,000.00
Existing Use: Proposed Use:
Description of INGROUND FIBERGLASS POOL, NO HEATER
Work:
Owner Contractor
RONALD BUSHNER QUALITY FIBERGLASS POOLS
27865 BARONI ROAD 32497 HWY 74
MENIFEE,CA 92585 HEMET, CA 92545
Applicant Phone:9519266060
ERIC BENSON License Number.361530
QUALITY FIBERGLASS POOLS
32497 HWY 74
HEMET, CA 92545
Fee Description Citv Amount 1$)
Swimming Pool/In-Ground Spa 1 467.00
Building Permit Issuance 1 27.00
GREEN FEE 1 2.00
SMIP RESIDENTIAL 1 4.00
General Plan Maintenance Fee-Electrical 1 23.35
$623.35
The issuance of this permit shall not prevent the building official from thereafter requiring the correction of errors in the plans and
specifications or from preventing builiding operations being carried on thereunder when in violation of the Building Code or of any other
ordinance of City of Menifee.Except as otherwise stated,a permit for construction under which no work is commenced within six
months after issuance,or where the work commenced is suspended or abandoned for six months,shall expire,and fees paid shall be
forfeited.
AA_Bldg_Pe"il Template.rpt Page 1 of 1
City Of Menifee
LICENSED DECLARATION ❑ lam exempt from Iicensure under the Contractors'State License Law forth(
I hereby affirm under penalty or perjury that I am licensed under provisions of following reason:
Chapter 9(commencing with section 7000)of Division 3 of the Business and By my signature below I acknowledge that, except for my personal residence it
Professions Code/a�nd--m�y license is in full force and eft. which I must have resided for at least one year prior to completion o
License Cl Sri License No. -3 C improvements covered by this permit. I cannot legally sell a structure that I haw
Expires Signature �- built as an owner-building if it has not been constructed in its entirety by licenser
contractors. I understand that a copy of the applicable law,Section 7044 of IN
WORKERS'COMPENSATION DECLARATION Business and Professions Code,is available upon request when this application is
submitted or at the following Web site:
❑ I hereby affirm under penalty of perjury one the following declarations: http:/Iwww.leginfo.ca.aov/calaw.html.
I have and will maintain a certificate of consentt of self-insure for workers
compensation,issued by the Director of Industrial Relations as provided for by Date
Section 3700 of the Labor Code, for the performance of work for which this
permit is issued. Property Owner or Authorized Agent
Policy# ❑ By my Signature below, I certify to each of the following: I am the propery
4I have and will maintain workers' compensation Insurance, as required by owner or authorized to act on the property owner's behalf. I have read thi:
don 3700 of the Labor Code, for the performance of the work for which this application and the Information I have provided Is correct. I agree to compl}
permit is issued.My workers'compensation insurance carder and policy number are: with all applicable city and county ordinances and state laws relating to buildinc
- , construction.I authorize representatives of this city or county to enter the above
Carrier TC)46e f identified property for the Inspection purposes.
Date
Policy# 3 t+('t v xpires ,�
Properly Owner or Authorized Agent
(This section need not be completed If the permit is for City Business License If
dollars($100)or less)
❑ 1 certify that in the performance of the work for which this permit is issued,I HAZARDOUS MATERIAL DECLARATION
shall not enrol ov any persons in any manner so as to become subject to the Will the applicant or future building occupant handle hazardous material or a
workers'compensation laws of California, and agree that if I should become mixture containing a hazardous material equal to or greater that the
subject to the workers'compensation provisions of Section 3700 of the Labor amounts specified on the Hazardous Materials Information Guide?
Code,I shall forthwith comply with those provisions. ❑YES �NO
Applicant; ate, Will the Intended use of the building by the applicant or future building
occupant require a permit for the construction or modification from South
WARNING: FAILURE TO SECURE WORKERS' Coast Air Quality Management District(SCAQMD)?See permitting checklist
COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL for guide;es
SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND OYES Lx NO
CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS
($100,000), IN ADDITION TO THE COST OF COMPENSATION, Will the proposed building or modified facility be within 1000 feet of the outer
DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE boundary of a school?
LABOR CODE, INTEREST,AND ATTORNEYS FEES ❑YES ONO
CONSTRUCTION LENDING AGENCY I have read the Hazardous Material Information Guide and the SCAQMD
I hereby affirm that under the penalty of perjury there is a construction lending permitting checklist.I understand my requirements under the State of
agency for the performance of the work which this permit Is Issued (Section California Health&Safety Code,Section 25505 and 25534 concerning
3097 Civil Code) hazardous material reporting.
OWNER BUILDER DECLARATIONS 111IES NO
I hereby affirm under penally of perjury that I am exempt from the Contractor's ate
License Law for the reason(s)indicated below by the checkmark(s)I have placed PROPERTY OWNER OR AUTHORIZED AGENT
next to the applicable item(s)(Section 7031.5.Business and Professions Code:
Any city or county that requires a permit to construct, alter, improve,demolish, EPA RENOVATION.REPAIR AND PAINTING(RRP)
or repair any structure, prior to its issuance, also requires the applicant for the
permit to file a signed statement that he or she is licensed pursuant to the The EPA Renovation,Repair and Painting(RRP)Rule requires contractors
Provisions of the Contractor's State License Law(Chapter 9 (commencing with receiving compensation for most work that disturbs paint In a pre-1978
Section 7000)of Division 3 of the Business and Professions Code)or that he or residence or childcare facility to be RRP-certified firms and comply with
she is exempt from Iicensure and the basis for the alleged exemption. Any required practices.This includes rental property owners and property
violation of Section 7031.5 by any Applicant for a permit subjects the applicant to managers who do the paint-disturbing work themselves or through their
a civil penalty of not more than($500).) employees.For more.information about EPA's Renovation Program visit
❑ I, as owner of the property www.epa.gov/lead or contact the National Lead Information Center at
p perty, or my employees with wages as their sole 1-800.424-LEAD(5323).
compensation,will do( )all of or( ) porting of the work, and the structure is
not intended or offered for sale.(Section 7044,Business and Professions Code;
The Contractor's State License Law does not apply to an owner of a property ❑An EPA Lead-Safe Certified Renovator will be responsible for this project
Who, through employees' or personal effort, builds or improves the property,
Provided that the Improvements are not intended or offered for sale.If,however, Certified Finn Name:
the building or improvement is sold within one year of completion,the Owner-Builder will have the burden of proving that it was not built or improved for the
Purpose of sale). Finn Certification No.:
❑ I, as owner of the property an exclusively contracting with licensed ❑No EPA Lead-Safe Certified Firm is required for this project because:
contractors to construct the project(Section 7044,Business and Professions
Code:The Contractor's License Law does not apply to an owner of a property
who builds or improves thereon, and who contracts for the projects with a
licensed contractor(s)pursuant to the Contractors State License Law). If your project does not comply with EPA RRP rule please fill out the RRP
Acknowledoement.
Aj:j NJ III •
Menifee
DATE `fj PERMIT/PLAN CHECK NUMBER
TYPE: O COMMERCIAL Y RESIDENTIAL O MULTI-FAMILY O MOBILE HOME O POOL/SPA O SIGN
SUBTYPE: O ADDITION O ALTERATION O DEMOLITION O ELECTRICAL O MECHANICAL
O NEW O PLUMBING O RE-ROOF-NUMBER OF SQUARES
l Building & Safe I Dept.
ee
DESCRIPTION OF WORK
Q FEB 1 116
PROJECTADDRESS ..,,pp
ASSESSOR'S PARCEL NUMBER ?,61�1'O�S-Qy2 LOT TRACT 'uce'v d
OWNERNAME
ADDRESS
PHONE EMAIL
APPLICANT NAME ,
ADDRESS 7`fj7 -G wi
PHONE q�.5-( EMAIL
CONTRACTOR'S NAME (� ( l OWNER BUILDER? O YES �YNO
BUSINESS NAME (� �� 1�.,,'/ rp !f
ADDRESS /t4c Ll`� t4c, e{ 1, Vr
PHON � 17i -���/� EMAIL
CONTRACTOR'S STATE LIC NUMBER / mod LICENSE CLASSIFICATION
VALUATION$ SQ FT L SQ FT
APPLICANT'S SIGNATUREf� DATE lG
CITY STAFF USE ONLY
DEPARTMENT DISTRIBUTION ^^ CITY OF MENIFEE BUSINESS UCENSE NUMBER
BUILDING PLANNING ENGINEERING FIRE I GREEN R SMIP
INVOICE ^� PAID AMOUNT
AMOUNT �:J• 3•'3 O CASH O CHECK# O CREDIT CARD VISA/MC
PLAN CHECK FEES PAIDAMOUNT OCASH OCHECK# OCREDITCARD VISA/MC
OWNER BUILDER VERIFIED O YES O NO DL NUMBER NOTARIZED LETTER O YES O NO
City of Menifee Building&Safety Department 29714 Houn Rd. Menifee, CA 92586 951-672-6777
www.cityofinenifee.us Inspection Request Line 951-246-6213
d0 -
\oJ'
�jilGO
G
✓ �, p�rN' -mac
T°O
�tlG\
l O
it
I n
c
,arK F
Y
�„ESS
5Z� kx b� Q
Zots 5
EVALUATION
Atz�t? SERVICE Most Widely 11
Acceptedand Trusted
IMES Evaluation Report ESR-2014
Reissued January 1, 2014 a
This report is subject to renewal November 1, 2016 O
www.icc-es.ora I (800)423-6587 I (662)699-0543 A Subsidiary of the International Code Council® V
W
DIVISION: 13 00 00—SPECIAL CONSTRUCTION Notice: The pool and spa shells are designed to remain
Section: 1311 13—Below-Grade Swimming Pools full of water at all times. The shell may be damaged if the ..�
water level is allowed to drop below the skimmer. When LL,
REPORT HOLDER: appreciable drawdown is noticed or if it becomes U.
necessary to drain the pool or spa, contact Viking Pools, O
VIKING POOLS, LLC LLC, or its dealers for instructions.
POST OFFICE BOX 550 3.2 Aboveground Pools and Spas:
JANE LEW,WEST VIRGINIA 26378
(304)884-6954 Models intended for installation up to 19'12 inches
www.vikina000ls.net (495 mm) above ground, listed in Table 3, have vertical
todd0vikinapools.net supports consisting of 1-inch-by-l'/2-inch-by-36-inch-long
(25 mm by 38 mm by 914 mm), Douglas fir, No. 2 wood
EVALUATION SUBJECT: members encapsulated in the FRP process at 4'/2-foot
(13372 mm)intervals.
FIBER REINFORCED PLASTIC SWIMMING POOL AND 4.0 INSTALLATION City of Menifee
SPA SHELLS 4.1 General: Building & Safety Dept.
1.0 EVALUATION SCOPE The swimming pool and,sga,�sh�ll rbe permanently
installed in-ground or, in sl f odels shown in
Compliance with the following codes: Table 3, up to 19'/2 inches (495 mm) above ground. All
■ 2012 and 2009 International Building Code(IBC) plumbing and electrical ' stallabons must comply with the
■ 2012 and 2009 International Residential Coarse(I RC) relevant codes in effect "�@t Gite at the time
of construction.
■ 1997 Uniform Building CodeTM (UBC)
® Subject to the code official's approval, the pool or spa
■ 2012 and 2009 International Plumbing Code (IPC) shells may be installed without a soil investigation by a
■ 2006 IAPMO Uniform Plumbing Code(IAPMO UPC) registered design professional, provided none of the
Properties evaluated: following conditions is encountered atthe site:
■ Physical properties 1. The existence of groundwater within the excavation,
where the pool or spa floor will contact the soil at the
■ Durability time of installation. 'e
2.0 USES 2. The existence of an uncompacted fill in contact with
The fiberglass pool and spa shells are for recreational use any portion of the pool or spa shell.
as swimming pools or spas in residential applications with 3. The existence of any expansive-type soils.
water circulated through a filter in a dosed system. The 4. The existence of any soil types with an angle of repose
pools comply with ANSI/NSPI-5 as Type 0 or Type I pools, that will not support the walls of the excavation at
and IAPMO PS 1-2000a,specified in the IAPMO UPC.The desired slopes.
spas comply with ANSIINSPI-3 and ANSI Z 124.7.
3.0 DESCRIPTION 5. Danger to adjacent structures posed by the proposed
pool or spa location.
3.1 General: If any of the above conditions is encountered, excavation
The fiberglass pool and spa shells consist of one-piece must cease immediately. The specified conditions at
fiberglass construction shop- formed over a mold. The the site must then be reviewed, and recommendations
material is minimum 1/,inch-thick (6.4 mm), fiberglass- made, by a registered design professional. The code
reinforced plastic (FRP), composed of isophtalic resin, official must approve the registered design professional's
vinylester resin, fiberglass, and ceramic. The surface finish recommendations; subject to the code official's approval,
is a neopentyl glycol gel coat. pools and spas may be installed in expansive-type soils in
The overall dimensions, depths and capacities are accordance with Section 4.2 before work is resumed.
shown in Table 1 for pools, Table 2 for spas and Table 3 The pool or spa excavation profile must coincide with the
for models that are permitted to be installed up to contours of the pool or spa. The overexcavation must be
19%inches(495 mm)above ground. approximately 6 to 24 inches(152 to 610 mm)on the sides
ICC-ESEvalaaeon Reports are nor to be construed as representing aestheticsorao,otheratMbutes notspecificalty addresse4 nor are they to be construed
as m endorsement ofthe subject ofthe report or a recommendationforits use.There is no warranty by ICC Evaluation Service.LLC espress orimpfie4 as
to anyfinding tiro,hermalterh,this report oras to anyprosbrclmveredby Use report
Copyright 0 2014 Page f of 5
ESR-2014 ( Most Widely Accepted and Trusted Page 2 of 5
and ends. The overexcavation at the pool bottom must be 5.1 The pool and spa shells must be constructed and
a minimum of 3 inches(76 mm).The backfill for the pool or installed in accordance with this report and the
spa bottom must consist of a layer of bedding sand formed manufacturer's published installation instructions. In
to match the pool or spa profile. This sand layer must be the event of conflict,this report governs.
compacted using a manual tamper and water. The pool or 5.2 Electrical and plumbing installations must comply with
spa shell must sit firmly on the sand and be within 1 inch the relevant codes in effect at the construction site at
(25.4 mm) of level.Simultaneous waterfill and sand backfill the time of construction.
operations must then commence. The sand must be
compacted with a tamper and water. The installer must 6.3 Clearances of the pools and spas from slopes set
ensure that the backfill level and water level are forth in IBC Section 1805.3, IRC Section R403.1.7 or
approximately the same throughout the filling procedure. UBC Section 1805.3.3 must be observed.
After completion of the backfill, the bond beam and 5.4 A barrier must be installed in accordance with IBC
decking must be installed in accordance with the Section 3109, IRC Section AG105, or UBC Appendix
manufacturer's published installation instructions, and Chapter 4,as applicable.
approved by the code official. 5.5 Slip resistance is outside the scope of this evaluation
4.2 Expansive soils: report. Reports of slip resistance tests that
For installation of pools or spas in expansive soils, the demonstrate compliance with Section 8.1 of
following additional installation details must be followed ANSI/NSPI-5 (2003)for swimming pools, or Sections
subject to the code official's approval: 5.4.1, 5.6.3.2 and 5.6.4.4 of ANSI/NSPI-3 (1999) for
spas, shall be submitted for approval by the code
1. All surfaces adjacent to the pool or spas must be official.
excavated to a depth of 12 inches (305 mm) beneath the pool bottom and 6 inches (152 mm) behind the 5.6 Diving equipment may only be installed on Type I
horizontal pool walls. pools and must meet the minimum requirements of,
and be installed in accordance with, Section 5.8 of
2. Any soft or loose soils exposed by step 1 must be ANSI/NSPI-5.
removed until exposed material is solid. If the soil is still 5.7 Pools located in flood hazard areas established in
soft and loose, the upper 6 inches (152 mm) of accordance with Table R301.2(1) of the IRC must
all horizontal excavation surfaces must be scarified
and compacted with mechanical equipment. The comply with Sections AG101.2 and AG103.3 of the
compacted surfaces and the excavated wall surfaces IRC.
must be maintained in a moist condition until the first lift 5.8 Suction outlets must be designed and installed in
of backfill or fill is placed against the surface. The term accordance with IBC Section 3109.5 and IRC Section
compaction implies any method necessary to AG106.1.
consolidate the native and fill materials to keep the pool 5.9 The pool and spa shells are fabricated by Viking
or structure from settling. Pools Inc. at their Williams, California; Midland,
3. The excavated bottom area of the pool or spa must be Texas; Jane Lew, West Virginia; Rockingham, North
backfilled with granular import material to approximately Carolina; or the Zephyrhills, Florida, facilities, under a
6 inches(152 mm)below the bottom of the pool or spa, quality control program with inspections by Columbia
wetted and compacted. Research and Testing Corporation (AA-527).
4. The remaining 6 inches (152 mm) must be backfilled 6.0 EVIDENCE SUBMITTED
beneath the pool or spa and behind the pool walls with Data in accordance with the ICC-ES Acceptance Criteria
clean sand and compact The pool or spa must be filled for In-ground, Residential, Fiber-reinforced Plastic
with water as backfilling progresses to a level Swimming Pools and Permanently Installed Plastic Spas
equivalent to that of the backfill. The backfill must be (AC274), dated December 2006 (editorially revised July
placed in compacted layers of approximately 6 inches 2011)
(152 mm) while a uniform height of backfill is
maintained around the pool or spa. 7.0 IDENTIFICATION
5. Positive surface drainage away from the perimeter of The pool and spa shells are identified by the following
the pool and surrounding deck is required and critical to information imprinted on the top step of the pool or spa
installations in highly expansive soils. Surface area shell: manufacturer's name (Viking Pools, LLC) and
drains and surface drainage swales or subdrains must address, pool or spa shell designation, a coded serial
be placed as needed to prevent ponding or saturation number and the evaluation report number(ESR-2014).
of the soil around the perimeter and vicinity of the pool The units also bear the label of the inspection agency,
to prevent excessive shrink-swell or volume changes in Columbia Research and Testing Corporation(AA-527).
the soil. A permanent sign, bearing the following statement, must
4.3 Aboveground Pools and Spas: be attached to the pumping equipment.
Models shown in Table 3 may be installed up to Notice., The pool and spa shells are designed to remain
19 /z inches (495 mm) above ground. These pool and spa full of water at all times. The shell may be damaged if the
shells may be placed with or without concrete or wood water level is allowed to drop below the skimmer. When
decking. Unless the elevated external portions of the units appreciable draw-down is noticed or if it becomes
are protected from sunlight by soil berms, decking, etc., necessary to drain the pool or spa, contact Viking Pool or
these portions must be coated with a UV-inhibiting opaque its dealers for instructions.
paint that is compatible with the laminate. A permanent label must be attached adjacent to the
5.0 CONDITIONS OF USE above sign indicating the Viking Pools, LLC, distributer's
The pool and spa shells described in this report comply name,address and telephone number.
with, or are suitable alternatives to what is specified in,
those codes listed in Section 1.0 of this report, subject to
the following conditions:
ESR-2014 I Most Widely Accepted and Trusted page 3 of 5
TABLE 1-POOLS
SERIES LENGTH (ft-in) WIDTH(ft-in) MAX DEPTH(114n) CAPACITY(gal) POOLTYPE
AC 39 16 6 16,700 Type 0
AL 26' 12' 6 16,700 Type 0
AP 38' 16 5110" 17,500 Type 0
ARU 22' 11' S' 5,200 Type 0
AT 40' 16' 6 21,000 Type 1
B 25'5" 11'10' 4'6" 8,100 Type
BAR 38' 16' 7' 18,500 Type 0
BFF 257' 11,11" 6' 9,000 Type 0
BKD 2311" 12'3" 6 6,000 Type 0
BL 49 11l10" 4'6' 14,000 Type 0
SN 40' 16 8' 22,000 Type 1
BP 28' 15'8" 5'11" 17,000 Type 0
BPD 38' 15,8" 8' 20,000 Type 1
CA 31' 14' 6' 12,000 Type 0
CC 36 16' 66" 14,000 Type 0
co 33' 16, 65" 15,000 Type 0
CL 39 14' 6 12,500 Type 0
CM 2a 11" 12'3" 5' 6,000 Type 0
CO 40' 16 T 18,000 Type 0
CP 31' 12' S' 19500 Type 0
CR 397' 1510" 6 19,500 Type 1
CRBJ 40' 16' T 19,000 Type 0
CRBL 32' IN 6 12,000 Type 0
CRBM 28' 12' 5' 7,000 Type 0
CRDFJ 38' 16' T 17,600 Type 0
CRDFL 31' 14' 6' 11,000 Type 0
CRDFM 24' 12' 5'6' 6,000 Type 0
CRDJ 40' 16 T 19,000 Type
CRDL 30, 14' 516" 10,000 Type
CRDM 25' 12' 5' 6,000 Type
CRSBJ 38' 16 7' 19,000 Type 0
CRSBL 30' 14' 6' 11,300 Type 0
CRSBM 24' 12' 66" 6,700 Type 0
CRSGJ 3N 16 66, 13,800 Type 0
CRSGL 30' 14' 6' 9,700 Type 0
CRSGM 23' 12' 5'6" 5,500 Type 0
CRSGS 20' 10, 4'6" 3,400 Type 0
CRUD 26' 12' 47" 4,400 Type 0
CRUJ 35' 16 616, 11,600 Type 0
CRUL 30' 14' 6' 8,000 Type 0
CRUM 26 12' 5' 5,300 Type 0
CRUS 20' 10, 4'6" 3,000 Type
GSA 34' 15' 6' 13,000 Type 0
FDM 30' 14' 6' 12,000 Type 0
FF 30' 13'9" 6 12,000 Type 0
FJI 34' 15, 6' 12,000 Type 0
FP 25' 12' S'S" 6,000 Type 0
FSP 25' 12' 66' 8,700 Type
GS 33'9" 14'8" 66, 14,300 Type 0
GC 397' 15,10" Tl1" 19,600 Type 1
GS 3N8" 197' 5110" 15,000 Type 0
HMT 34' 15, 6' 12,000 Type
JV 26' 12'1" 5' 6,800 Type 0
K 33'9" 14'8" S'3" 16,000 Type 0
KL 30, 14' 611" 11,300 Type 0
L 31'6" IN T 13,700 Type 0
LBBST 15' 12' 4' 2,500 Type 0
LCN 30' 14' 99" 10,800 Type 0
LD 1919" 9110" 5' 3,750 Type 0
LG W. 14' 6 10,000 Type 0
LGDLX 39 1N 6' 14,000 Type
LN 36 16 T 18,000 Type 0
ESR-2014 I Most Widely Accepted and Trusted Page 4 of 5
TABLE 1—POOLS(Continued)
SERIES LENGTH(ft-in) WIDTH(ft-in) MAX DEPTH(ft-in) CAPACITY(gal) POOL TYPE
MC 238" 12' 5'5" 6,000 Type 0
MFF 14'3" 8'7" 4' 1700 Type 0
MK 2TT' 14'6" 5'10" 10,000 Type 0
MLL 1610" 96, 4' 2,200 Type 0
MP 14'6" 916, Sill, 2,500 Type 0
MR 40' 16' 66, 17,000 Type 0
MT 3S 14' ST' 12,400 Type 0
MTK 16 9'3" 4' 2,300 Type 0
NB 21' 16 4" 4'4" 7,000 Type 0
NT 34'8" 157' 610" 14,500 Type 0
OB 40' 16 68" 18,900 Type 0
PRT 23' 12' Sell 6,700 Type 0
PS 49 16 T 17,500 Type 0
RP 30' 14' 611" 12,800 Type 0
RS W. 14' 66, 12,500 Type 0
SFF 24'16' 11,10" 66, 12,000 Type 0
SH 36 14' 610" 10500 Type 0
SK 199, 9110" 6 3,000 Type 0
SL 39, T7" 4' 6,500 Type 0
SP 20' la S 3,600 Type 0
SR 39' 16 6 15,000 Type 0
ST 2T7" 14'6" 5110" 9,800 Type 0
TN W. 14' 5'11" 13,500 Type 0
TND 44' 16, 7' 191300 Type 0
V 33' 14' 64" 11,700 Type 0
HZA 1& 8'6' 6 4,500 Type 0
HZB 18' 8'6' 6' 4.300 Type 0
HZC 16 96, 66" 4,050 Type 0
HZD 16 8'6' 66" 3,850 Type 0
HZDXL 1& 816, 6 3,000 Type
HZE le Us" 6 3,600 Type 0
HZF le eel 6 3400 Type
HZG 9' 8'6" 4'6" 1,,200 Type 0
HZH 9 8'6' 1 6 1,350 Type 0
WL 26 16' 5 10,500 Type 0
For SI:1 inch=25.4 mm, 1 foot=305 mm,1 gallon=3.785 L,
•ESR-2014 I Most Widely Accepted and Trusted Page 5 of 5
TABLE 2—SPAS
SERIES SHAPE DIAMETER OR WIDTH(ft. DEPTH(ft-in) CAPACITY(gal)
in)
BOS Octagonal 8'4" 3' 475
BOSSP Octagonal 8'4" 116" 270
BOSSW Octagonal 8'4" 3' 475
CS Octagonal 8'x 12'5" 3' 700
CSSP Octagonal 8'x 125" 1'6" 430
CSSW Octagonal 8'x 125" 3' 700
LOS Dodecagon T6" 3' 450
LOSSP Dodecagon T6" 116, 220
LOSSW Dodecagon T6' 3' 450
LRS Round T 3' 420
LRSSP Round T 116, 180
LRSSW Round 7' 3' 420
M Round 10, 3'4" 550
MSP Round 10' 1.61 325
MSW Round la 3'4" 550
RG Freeform 8'x 10' 3'4" 600
RGSP Freeform 8'x 10' 1'6" 470
RGSW Freeform 8'x 10' 3'4" 600
RY Regtangle 8'x 10' 3'4" 600
RYSP Regtangle 8'x 10' 1'6" 330
RYSW Regtangle 8'x 10' 3'4" 600
IRS Round 69, 3'0" 275
RSSW Round 68" 3'0" 275
RSSP Round 581, 1.6. 150
OS Octagonal 69, 3'0" 375
OSSW Octagonal 6'0" 30" 375
OSSP Octagonal 60" 116, 125
SPKM Kidney Tx 10' 3' 400
SS Square 66 30" 295
SSSW Square 66 3'0" 295
SSSP Square 6'6' 116, 150
For SI:1 inch=25.4 mm,1 foot=305 mm, 1 gallon=3.785 L.,1 gallon=3.785 L.
TABLE 3—ABOVEGROUND POOLS AND SPAS(19%INCHES MAXIMUM ABOVE GRADE)
POOLS SPAS
AL MTK RL LOS CS M
ARU SK RSSW LOSSW CSSW MSW
B SL RSSP LOSSP CSSP MSP
BFF SP OS LRS RG CB
BKD — OSSW LRSSW RGSW CBSW
FP — PSSPO LRSSP RGSP CBSP
MFF — SS BOS RY LCS
MK — SSSW BOSSW RYSW RS
MLL — SSSP BOSSP RYSP SPKM